PN-Y475 (serv.man4) - Sharp Monitor User Guide / Operation Manual. Page 48

48

E

•  When installing, removing or moving the monitor, ensure that this is carried out by at least 2 people.
•  Be sure to use a wall-mount bracket designed or designated for mounting the monitor.
•  This monitor is designed to be installed on a concrete wall or pillar. Reinforced work might be necessary for some materials 

such as plaster / thin plastic board / wood before starting installation.

•  This monitor and bracket must be installed on a wall which can endure at least 4 times or more the weight of the monitor. 

Install by the most suitable method for the material and the structure.

•  To attach a VESA-compliant mounting bracket, use M6 screws that are 5/16 inch (8 mm) to 3/8 inch (10 mm) longer than the 

thickness of the mounting bracket.

•  Do not use an impact driver.
•  When moving the monitor, hold the parts marked by 

 below. Do not hold the LCD panel. This may cause product 

damage, failure, or injury.

•  After mounting, please carefully ensure the monitor is secure, and not able to come loose from the wall or mount.
•  Do not use any screw holes other than VESA holes for installation.