Read Sharp PN-V602 Handy Guide online
PN-V601/V601A/PN-V602 Installation Manual for Multi Displays <Rev3.0> 2013/10
CONFIDENTIAL
The setting for the horizontal installation in the OSD menu is required, when displays are installed horizontally.
Face-up horizontal installation setting
1) Press [SIZE] key for approx. 5 seconds.
(and the character “F” appears in the upper left of the screen)
2) [ ][ ][ ][ ]
1) Hold for approx 5 sec. both [MENU] and [INPUT] at the same time.
(and the character “F” appears in the upper left of the screen)
2) [ ][ ][ ][ ]
1. How to call menu
CUSTOM SETTING
MONITOR LAYOUT
FACE UP
- Change [VERTICAL] to [FACE UP].
- After checking the display, turn off the main
power
Note)
- Change the setting to [VERTICAL] in order to
change from horizontal installation to vertical one.
change from horizontal installation to vertical one.
- Do not use other setting.
2. Setting of the face-up installation
- If using the remote control unit
- If using the monitor buttons on the rear panel,
OK ---- [MENU]
Setting of face-up horizontal installation
6
Face-UP installation
Click on the first or last page to see other PN-V602 service manuals if exist.