Read Sharp PN-V601 Handy Guide online
PN-V601/V601A/PN-V602 Installation Manual for Multi Displays <Rev3.0> 2013/10
CONFIDENTIAL
Securing Space and Temperature Conditions
Wall
Display screen surface
Protection panel etc.
Secure space more than 10 cm
Upper part of the unit
Ventilation duct installed
Fix the unit using VESA compliant holes.(toward the direction of yellow arrow)
Securing Space and Temperature Conditions
Secure space
more than 20 cm
Upper part of the unit
Lower part of the unit
Secure space
over 20 cm
Lower part of the unit
Floor
-Please secure space more than 20 cm from wall and floor in order to flow air smoothly.
- It may be necessary to take measures in order for inner fan to exhaust air immediately (i.e. guide the air flow by duct).
- It is necessary to keep the surrounding temperature under 30C degree. In other words, the air conditioner system must
work efficiently. The temperature at the heat outlet of fan
- It may be necessary to take measures in order for inner fan to exhaust air immediately (i.e. guide the air flow by duct).
- It is necessary to keep the surrounding temperature under 30C degree. In other words, the air conditioner system must
work efficiently. The temperature at the heat outlet of fan
(upper side of the display: at the part of illustration below)
must be kept under 35C degree.
- If displays are overlaid with protection panel, the temperature of the space between display surface and protection panel
must be kept under 40C degree with cooling system.
- If displays are overlaid with protection panel, the temperature of the space between display surface and protection panel
must be kept under 40C degree with cooling system.
(More than wind velocity 1m/s )
-- As the protection panel may transform and curves inward by heat depending on its material, it should be set and adjusted
considering necessary space between display and protection panel based on the flexure of protection panel,
load from upper part, installation method, or the material of protection panel etc.
(Please be careful that protection panel must not touch the display surface even if it is curved.)
- Do not press the display surface and drop anything on the display surface.
- Please be careful not to nip cables between display and mounting bracket.
- Please be careful not to nip cables between display and mounting bracket.
7
Face-UP installation
Click on the first or last page to see other PN-V601 service manuals if exist.