PN-V601 (serv.man8) - Sharp Monitor User Guide / Operation Manual. Page 10

E

10

n

TREBLE
Adjusts the volume of treble-level sound.
BASS
Adjusts the volume of bass-level sound.
BALANCE
Adjusts the balance of the audio sound between right and left.
RESET
Resets the values of the AUDIO menu items to the factory preset values.

Select “ON” and then press 

MENU

.

n

OSD H-POSITION
Adjusts the horizontal display position of menu screen.
OSD V-POSITION
Adjusts the vertical display position of menu screen.
MONITOR
Select the installation direction of the monitor.

LANDSCAPE ............Horizontal orientation

PORTRAIT ...............Vertical orientation
LANGUAGE
Sets the display language for the menu screen.
POWER ON DELAY
You can delay the screen display after the monitor is turned 

on. The period can be set up to 60 seconds in units of one 

second. When this function is activated, the power LED 

flashes (at approx. 1 second interval) in orange. This function 

is disabled when 0 is specified.
OPERATION MODE
MODE1 ......Limits the maximum brightness lower than 

MODE2. 

OFF IF NO OPERATION is set to ON, and 

STANDBY MODE is set to LOW POWER.  

(These settings can not be changed.)

MODE2 ......Will perform standard operation. 

OFF IF NO OPERATION is set to OFF, and 

STANDBY MODE is set to STANDARD. These 

settings can be changed.

STANDBY MODE
When STANDARD is selected, startup time from standby 

mode is reduced. Note, however that, more power will be 

consumed in standby mode.

When LOW POWER is selected, current consumption 

is reduced while the monitor is in standby mode. Note, 

however, that the startup time from standby mode becomes 

longer.

If set to LOW POWER, certain RS-232C commands cannot 

be used in standby mode, and control via LAN will be 

disabled.
OFF IF NO OPERATION
Determines whether or not to set the monitor to go into 

standby mode when there is no operation from the remote 

control unit, RS-232C commands, or LAN for over 4 hours.

HDMI SETTING
HDMI AUTO VIEW

 ......................... When ON is selected, the screen size is 

adjusted automatically according to the 

screen size control signal included in the 

video signal input from the AV HDMI input 

terminal.

HDMI RGB INPUT RANGE

 ......................... Sets the type of HDMI signals when using 

the AV HDMI input mode. 

When AUTO is selected, the type is set 

automatically.

HOT PLUG CONTROL
Sets whether to use hot plug control for the PC/AV HDMI 

and PC/AV DVI-D input terminals.
RS-232C/LAN SELECT
Selects the method with which to control the monitor from 

the computer.
ID No. SET
Assigns ID numbers to monitors connected in a daisy chain 

(see page 18), using the remote control unit or RS-232 

cables.

The numbers 1 to 255 are available for ID numbers.

If “0” is set, the system regards this as the state where no ID 

number is set.
AUTO ASSIGN ID No.
ID No. to be used will be automatically assigned when 

multiple monitors are connected with RS-232C.

Select ON, then press 

MENU

. Perform operations with the 

primary monitor.
BAUD RATE
Selects the communication speed used for RS-232C 

communication.
LAN SETUP
Configures the settings to control the monitor from the 

computer via LAN. (See page 28.)
BRIGHTNESS SENSOR  

(When connected to the PN-ZR01 only)
When set to ON or ON: DISPLAY, the brightness will 

automatically change according to the lighting and 

surrounding brightness. Performs operation with the primary 

monitor. If set to ON: DISPLAY, the effect will be displayed 
with a 

.

If connecting to multiple monitors, the brightness of all the 

monitors will change.
The 

 will be displayed on the primary only.

(When connected to the PN-ZR01 only)
Performs adjustments to the brightness sensor. Performs 

operation with the primary monitor.

Set the surrounding brightness and the current screen 

luminance to AMBIENT BRIGHTNESS and SCREEN 

BRIGHTNESS.

Individually set WHEN LIGHT: and WHEN DARK:.

Even if brighter or darker than the set AMBIENT 

BRIGHTNESS, the screen brightness will not change.

Current AMBIENT BRIGHTNESS is shown for reference.