Read Sharp PN-V601 (serv.man2) Handy Guide online
CONFIDENTIAL
CONFIDENTIAL
Multi Display Setup Manual <Rev1.0 > September.30, 2010
16
•
The color can be adjusted by the image adjustment function of the display by operating remote
controller or the control tool offered from our company.
(Please refer to software tool SHARP Monitor Control Software.
)
•
Also, it can be adjusted with the color calibration tool from our company.
(Please refer to software tool Multi Display Calibration Tool).
It is necessary to buy our recommended colorimeter. For the adjustment of one unit, it will take
about five minutes with 6‐gradation adjustment of (our recommendation), about seven minutes
with 16‐gradation, and about 10 minutes with 32‐gradation
How to adjust the color
Color Adjustment Procedures for New Installation
Need set to a specific color
temperature and brightness
by using the colorimeter
YES
Need adjust the color with
the installation environment
NO
color temperature and
brightness are have been
adjusted at factory
End of
Adjustment
Can adjust
Adjust with the color
calibration tool
End of
Adjustment
Can adjust
Fine‐tunes with manual
adjustment for the gamma
value of the calibration tool.
End of
Adjustment
* Usually, you need not use the color calibration tool .
End of
Adjustment
Calibration (1)
Adjust with the image adjustment
function of the display
Click on the first or last page to see other PN-V601 (serv.man2) service manuals if exist.