Read Sharp PN-U423 (serv.man2) Service Manual online
PN-U553/U473/U423 OUTLINE OF THE PRODUCT 1 - 1
CHAPTER 1 OUTLINE OF THE PRODUCT
1. Specifications
1 – 1.Product Specifications
Model PN-U553
PN-U473
PN-U423
LCD component
55" Class [54-5/8 inch
(138.8cm) diagonal]
TFT LCD
(138.8cm) diagonal]
TFT LCD
47" Class [46-15/16
inch (119.3cm)
diagonal] TFT LCD
inch (119.3cm)
diagonal] TFT LCD
42" Class [42 inch
(106.7cm) diagonal]
TFT LCD
(106.7cm) diagonal]
TFT LCD
Max. resolution (pixels)
1920 X 1080
Max. colors
Approx. 1.06 billion colors
Pixel pitch
0.630 mm (H) × 0.630 mm (V)
0.542 mm (H) × 0.542 mm (V)
0.485 mm (H) × 0.485 mm (V)
Viewing angle
178° right/left/up/down (contrast ratio
≥ 10)
Screen active area inch (mm)
47-5/8 (W) x 26-13/16 (H)
(1209.6 x 680.4)
(1209.6 x 680.4)
40-15/16 (W) x 23 (H)
(1039.7 x 584.8)
(1039.7 x 584.8)
36-5/8 (W) x 20-5/8 (H)
(930.2 x 523.3)
(930.2 x 523.3)
Computer input signal
Digital (DVI 1.0 standard-compliant), Analog RGB (0.7 Vp-p) [75
Ω],
DisplayPort 1.1
Sync signal
Horizontal/vertical separate (TTL: positive/negative)
Video color system
NTSC (3.58MHz)/NTSC (4.43MHz)/PAL/PAL-60/SECAM
Plug and play
VESA DDC2B
Power management
VESA DPMS, DVI DMPM
Input
terminals
terminals
PC/AV HDMI
x
1
PC
Mini D-sub 15 pin, 3 rows x 1
DisplayPort x 1
DVI-D 24 pin (HDCP compatible) x 1
DisplayPort x 1
DVI-D 24 pin (HDCP compatible) x 1
AV
Component: BNC (Y, Cb/Pb, Cr/Pr) x 1
*1
Composite video: BNC x 1
*1
Audio
3.5 mm mini stereo jack x 1
RCA pin (L/R) x 1
RCA pin (L/R) x 1
Serial (RS-232C)
D-sub 9 pin x 1
Output
terminals
terminals
PC
DVI-D 24 pin (HDCP compatible) x 1
Audio
RCA pin (L/R) x 1
Serial (RS-232C)
Serial (RS-232C) D-sub 9 pin x 1
LAN terminal
10 BASE-T/100 BASE-TX
Speaker output
10 W + 10 W
Power requirement
AC 100 - 240 V, 1.5 A,
50/60 Hz
50/60 Hz
AC 100 - 240 V, 1.5 A,
50/60 Hz
50/60 Hz
AC 100 - 240 V, 1.3 A,
50/60 Hz
50/60 Hz
Operating temperature
*2
41°F to 104°F(5°C to 40°C)
*3
32°F to 104°F (0°C to 40°C)
Operating humidity
20% to 80% (no condensation)
Power consumption
(input signal waiting mode
/ standby mode
(input signal waiting mode
/ standby mode
*4
)
130 W (4.5 W / 4.5 W)
130 W (4.5 W / 4.5 W)
115 W (4.5 W / 4.5 W)
Dimensions
(excluding protrusions)
inch (mm)
(excluding protrusions)
inch (mm)
Approx. 49-3/16 (W) x
2-1/4 (D) x 28-3/8 (H)
(1250 x 57 x 721)
2-1/4 (D) x 28-3/8 (H)
(1250 x 57 x 721)
Approx. 42-5/8 (W) x
2-3/16 (D) x 24-11/16 (H)
(1083 x 55 x 627)
Approx. 38-5/16 (W) x
2-1/4 (D) x 22-1/4 (H)
(973 x 57 x 565)
Weight lbs. (kg)
Approx. 55.2 (25)
Approx. 41.9 (19)
Approx. 35.3 (16)
*1 Cannot be used simultaneously.
*2 Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP. In such
cases, please check the temperature condition specified by the optional equipments.
*3 Use of the monitors in temperatures below 50°F (10°C) might result in inconsistent image quality that, depending on the viewing angle,
might be noticeable along the edges of the screen. Please note that this is not a malfunction and does not affect monitor operation.
*4 When STANDBY MODE is set to STANDARD. When STANDBY MODE is set to LOW POWER: 0.5 W
Click on the first or last page to see other PN-U423 (serv.man2) service manuals if exist.