Read Sharp PN-R903 Handy Guide online
Precautions for attachment
VESA compliant Mounting bracket for display (M6 screw)
-Please take attention to the following items for using screw holes on the back of IDP.
1) Please use at least 4 mounting screws to fix the display
1) Please use at least 4 mounting screws to fix the display.
2) Please use symmetrical screw holes across the centre line.
2) Please use symmetrical screw holes across the centre line.
*It can cause malfunction or deformation of the display in case of using screw holes asymmetrically.
3)Please use a mounting bracket having less than or equal to 7.5mm hole diameter.
*O
i
f h l di
t
f t i
f th
ti
t b th
ti
*Oversize of hole diameter can cause unfastening of the captive nut by the mounting screw.
4)Please use screws which is correct length written in the operation material of display.
*Over length of screw can cause unfastening of the captive nut by the mounting screw.
5)Please certainly take some kind of measures to prevent the screws loosening.
(For example : using screws with washer)
6) Please tighten screws hard within 3N*m strength.
(Tightening torque: 3N*m )
Length of screw : 8mm-10mm
H l di
t
f
ti
b
k t
600
VESA pitch of PN-R903 is different from previous displays.
Hole diameter for mounting bracket
(less than or equal to 7.5mm)
(less than or equal to 7.5mm)
Screw (M6)
back
400 600
Mounting bracket
Rear cover of display
Captive nut for
fixing
PN-R903 Installation Guidelines <Rev1.0> February 2013
CONFIDENTIAL
33
back
Rear cover of display
Click on the first or last page to see other PN-R903 service manuals if exist.