PN-R903 (serv.man7) - Sharp Monitor User Guide / Operation Manual. Page 49

49

E

This screen allows you to set the settings necessary when the 

monitor is connected to a LAN.

DHCP CLIENT
If your LAN has a DHCP server and you wish to obtain an 

address automatically, change this setting to ON. 

To set the address manually, set this to OFF. 
IP ADDRESS
If the DHCP CLIENT is set to OFF, specify an IP address.
SUBNET MASK
If the DHCP CLIENT is set to OFF, specify the subnet mask.
DEFAULT GATEWAY
If the DHCP CLIENT is set to OFF, specify the default 

gateway. 

If you are not using a default gateway, specify “0.0.0.0”.
DNS SERVER ADDRESS AUTO ACQUISITION
If the DHCP CLIENT is set to ON, specify whether or not to 

automatically obtain the DNS server address.
DNS SERVER
Specify the DNS server address if the DHCP CLIENT 

is SET to OFF or the DNS SERVER ADDRESS AUTO 

ACQUISITION is set to OFF.

If you are not using a DNS server, specify “0.0.0.0”. 
RESET
Clicking [Execute] returns all of the LAN SETUP settings 

to the factory-preset values except for the DNS SERVER 

ADDRESS AUTO ACQUISITION and DNS SERVER 

settings.

TIPS

•  When the IP address is set manually, the IP addresses of 

the monitor connected to the RS-232C output terminal and 

the daisy chain of connected monitors that follows can be 

assigned automatically. (See page 25.)

This screen allows you to specify the security-related settings.

USER NAME / PASSWORD
Sets up a user name and password to restrict access to this 

monitor. 

After entering a user name and password, click [Apply].
ACCEPT IP ADDRESS
You can limit access to this monitor by registering IP 

addresses of PCs that should have access. 

To limit access, specify the option “From only specific IP 

addresses”. Otherwise, to allow access from any PC, specify 

“All IP Addresses”.
IP ADDRESS 1 to 3
If “ACCEPT IP ADDRESS” is set to “From only specific IP 

addresses”, enter the IP addresses that you want to allow. 

TIPS

•  The USER NAME and PASSWORD can be up to 8 

alphanumeric characters (hyphens and underscores 

allowed).

•  To cancel the user name and/or password after it has been 

set, make the box empty and click [Apply].