Read Sharp PN-R603 (serv.man7) User Guide / Operation Manual online
18
E
Basic Operation
1
2
3
4
4
5
8
9
10
7
6
1. INPUT (Input mode selection)
The menu is displayed. Press
The menu is displayed. Press
or
to select the input
mode, and press
ENTER
to enter.
* You can select the input terminal by pressing the input
switch of the monitor.
Input mode
Video
Audio
DVI-I
DVI-I input terminal
*4
DisplayPort
DisplayPort input terminal
HDMI1[PC]
PC/AV HDMI1 input
terminal
terminal
*1
HDMI1[AV]
HDMI2[PC]
HDMI2[PC]
PC/AV HDMI2 input
terminal
terminal
*2
HDMI2[AV]
D-SUB[RGB]
D-SUB[RGB]
PC/AV D-sub input
terminal
terminal
*3
D-SUB[COMPONENT]
D-SUB[VIDEO]
D-SUB[VIDEO]
*1 Select the terminal to be used in HDMI1 of INPUT
SELECT. (See page 24.)
*2 Select the terminal to be used in HDMI2 of INPUT
SELECT. (See page 24.)
*3 Select the terminal to be used in D-SUB of INPUT
SELECT. (See page 24.)
*4 Select the terminal for AUDIO SELECT which is used for
audio input. (See page 24.)
2. MUTE
Turns off the volume temporarily.
Press the MUTE button again to turn the sound back to the
previous level.
3. MENU
Displays and turns off the menu screen. (see page 20.)
4. VOL +/- (Volume adjustment)
Pressing
Pressing
or
displays the VOLUME menu when the
menu screen is not displayed.
V O L U M E
15
Press
or
to adjust the volume of the sound.
* If you do not press any buttons for about 4 seconds, the
VOLUME menu automatically disappears.
5. BRIGHT +/- (Brightness adjustment)
Pressing
or
displays the BRIGHT menu when the
menu screen is not displayed.
B R I G H T
15
Press
or
to adjust the brightness.
* If you do not press any buttons for about 4 seconds, the
BRIGHT menu automatically disappears.
6. ENTER
Confirms the setting.
7. RETURN
Returns to the previous screen.
8. SIZE (Screen size selection)
The menu is displayed.
Press
Press
or
to select the screen size. (See page 19.)
9. DISPLAY
Displays monitor information.
The display changes from INFORMATION1 →
INFORMATION2 → clear display, and so on every time you
press this button.
• The display disappears automatically after about 15
seconds.
•
LAN
is displayed during LAN communication.
• If
LAN
is displayed in red, there is a duplicate IP address.
10. MODE (Color mode selection)
Each time you press this button, the color mode changes in
the following order:
STD (Standard) → VIVID → sRGB →
HIGH ILLUMINANCE → STD...
• HIGH ILLUMINANCE is a display with colors suited to
bright locations.
• sRGB applies to PC input only.
sRGB is international standard of color representation
specified by IEC (International Electrotechnical
Commission). Color conversion is made in taking account
of liquid crystal’s characteristics and represents color tone
close to its original image.
Click on the first or last page to see other PN-R603 (serv.man7) service manuals if exist.