PN-R603 (serv.man7) - Sharp Monitor User Guide / Operation Manual. Page 12

Read Sharp PN-R603 (serv.man7) User Guide / Operation Manual online

12
E
Connecting Peripheral Equipment
  8.  DisplayPort output terminal
•  The video of the DisplayPort input can be output to an 
external device.
•  Use a commercially available DisplayPort cable.
•  Outputting HDCP-encrypted video requires an external 
device which supports HDCP.
•  This terminal allows the daisy chain connection (up to 25 
monitors or up to 4 monitors when transmitting HDCP-
encoded content) by connecting the monitors to each 
other through the DisplayPort input terminal of each 
monitor.
  9.  DVI-D output terminal
•  The video of the DVI-I (digital) input can be output to an 
external device.
•  Outputting HDCP-encrypted video requires an external 
device which supports HDCP.
•  This terminal allows the daisy chain connection of up 
to 5 monitors by connecting the monitors to each other 
through the DVI-I input terminal of each monitor.
TIPS
•  The length of the signal cables or surrounding environment 
may affect the image quality.
•  The output screen may not display properly when using 
terminals other than DVI-I for the input mode. In this case, 
turn off the power to all the monitors connected in a daisy 
chain and then turn the power on again.
•  When connecting monitors in a daisy chain set AUTO 
INPUT CHANGE to OFF.
•  Video output is disabled in the following cases: 
When the power is turned off 
When the monitor is in input signal waiting mode
 10.  Audio output terminal
•  The output sound varies depending on the input mode.
•  The volume of the output sound can be fixed by setting 
AUDIO OUTPUT of AUDIO OPTION on the SETUP 
menu.
•  It is not possible to control the sound output from the 
audio output terminals with the AUDIO menu.
 11.  RS-232C output terminal 
 12.  RS-232C input terminal
•  You can control the monitor from a PC by connecting a 
commercially available RS-232 straight cable between 
these terminals and the PC.
13.  LAN terminal
•  You can control the monitor from a PC on a network by 
connecting a commercially available LAN cable between 
this terminal and a network.
Page of 63
Display

Click on the first or last page to see other PN-R603 (serv.man7) service manuals if exist.