PN-L602B (serv.man6) - Sharp Monitor Service Manual (repair manual). Page 6

PN-L702B/L602B　OUTLINE OF THE PRODUCT

 1 – 2

*

1

Cannot be used simultaneously.

*

2

Does not support plug and play.

*

3

Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP.
In such cases, please check the temperature condition specified by the optional equipments.

*

4

In addition, check the requirements of the computer and other devices to be connected, and make sure that all requirements are satisfied.

*

5

When “AUTO INPUT CHANGE” is set to “OFF”.

*

6

When “STANDBY MODE” is set to “STANDARD”. When “STANDBY MODE” is set to “LOW POWER”: 0.5 W

*

Note that the values shown are approximate values.

When mounting the monitor, be sure to use a wall-mount bracket that complies with the VESA-compatible mounting method.

SHARP recommends using M6 screws and tighten the screws.

Note that screw hole depth of the monitor is 3/8 inch (10 mm). Loose mounting may cause the product to fall, resulting in serious personal injuries as
well as damage to the product. The screw and hole should come together with over 5/16 inch (8 mm) length of thread. Use a bracket which has been

approved for UL1678 standard, and which can endure at least 4 times or more the weight of the monitor.

4-9/16 

[116]

 7-7/8 

[200]

 7-7/8 

[200]

3-15/16 

[100]

3-15/16

[100]

 7-7/8 [200]

VESA 
holes

59-9/16 [1513]

Opening width (61-11/16 [1567])

Opening height 

(35-1/2 [

9

01])

64-7/8 [1648]

1-7/8
 [47]

38-11/16 [

9

82]

3

9

-7/8 [1013]

41 [1041]

2-3/16

[56]

3-5/8

[92.5]

Unit: inch [mm]

Unit: inch [mm]

 7-7/8 

[200]

 7-7/8 

[200]

3-15/16 

[100]

3-15/16

[100]

VESA 
holes

56-11/16 [1440]

51-1/8 [1298]

34-7/8 [886]

36 [

9

14]

7-7/8 [200]

4

[101]

3-1/16

[77.5]

1-7/8 

[47]

2-3/16
[56]

Opening width (53-7/16 [1358])

33-11/16 [855]

Opening height 

(30-1/2 [774])