Read Sharp PN-L602B (serv.man20) Technical Bulletin online
IDP 2014 09 01
Date of Issue:11
th
September 2014
Classification:
White
IDP TECHNICAL BULLETIN
Page 1 of 4
Sharp Electronics (UK) Limited
Reference
– PNF-A299
Revision - 1
White
– Carry out as required
Yellow
– Carry out as required and whenever the unit comes in for service
Red
– Carry out on all units
MODELS
PNL602B
REASON
Availability of Touch Panel LED PWB and Bezel Unit.
ACTION
We have registered the Touch Panel LED PWB and Bezel Unit as service parts.
There are two types of LED mounted to the Touch Panel LED PWB; one is by ROHM
and the other is by Sharp.
[Caution]
When replacing the Touch panel LED PWB, ensure NOT to mix the PWB with LED by
ROHM and Sharp.
If these PWBs are mixed, the machine may not work properly due to the variance in
characteristics of LED.
Similarly, pay attention on which LED is mounted to the Touch panel LED PWB when
replacing the Bezel unit BTM and Bezel unit R. Ensure the PWBs with LED by
different manufacturer are not mounted together.
* In cases where different types of Touch panel LED PWB have already been used
since repair etc. and the units has not had any problem, use the unit as it is without
replacing the PWB.
There is no requirement to distinguish Touch panel sensor PWB and Bezel unit Top /
Bezel unit L with Touch panel sensor PWB because they are compatible.
Confirmation of the production date
Using the information provided below, you can identify the production date using the
serial number:
There are two types of LED mounted to the Touch Panel LED PWB; one is by ROHM
and the other is by Sharp.
[Caution]
When replacing the Touch panel LED PWB, ensure NOT to mix the PWB with LED by
ROHM and Sharp.
If these PWBs are mixed, the machine may not work properly due to the variance in
characteristics of LED.
Similarly, pay attention on which LED is mounted to the Touch panel LED PWB when
replacing the Bezel unit BTM and Bezel unit R. Ensure the PWBs with LED by
different manufacturer are not mounted together.
* In cases where different types of Touch panel LED PWB have already been used
since repair etc. and the units has not had any problem, use the unit as it is without
replacing the PWB.
There is no requirement to distinguish Touch panel sensor PWB and Bezel unit Top /
Bezel unit L with Touch panel sensor PWB because they are compatible.
Confirmation of the production date
Using the information provided below, you can identify the production date using the
serial number:
The first digit is the year. The last digit is the month.
Note - The last digit goes from 0-9, X=October, Y=November and
Z=December.
Z=December.
IDP 2014 09 01
Date of Issue:11
th
September 2014
Classification:
White
IDP TECHNICAL BULLETIN
Page 2 of 4
Sharp Electronics (UK) Limited
Reference
– PNF-A299
Revision - 1
White
– Carry out as required
Yellow
– Carry out as required and whenever the unit comes in for service
Red
– Carry out on all units
IDP 2014 09 01
Date of Issue:11
th
September 2014
Classification:
White
IDP TECHNICAL BULLETIN
Page 3 of 4
Sharp Electronics (UK) Limited
Reference
– PNF-A299
Revision - 1
White
– Carry out as required
Yellow
– Carry out as required and whenever the unit comes in for service
Red
– Carry out on all units
IDP 2014 09 01
Date of Issue:11
th
September 2014
Classification:
White
IDP TECHNICAL BULLETIN
Page 4 of 4
Sharp Electronics (UK) Limited
Reference
– PNF-A299
Revision - 1
White
– Carry out as required
Yellow
– Carry out as required and whenever the unit comes in for service
Red
– Carry out on all units
Reference Number Description
Model Number PART NUMBER
PRICE CODE
3-502
Bezel Unit BTM PNL-602B
DUNT-1927MPS6
CR
3-35
LED-XA PWB
PNL-602B
CPWBX1137MPSE
BW
3-36
LED-XB PWB
PNL-602B
CPWBX1137MPSK
BR
3-37
LED-XC PWB
PNL-602B
CPWBX1137MPSL
BQ
3-38
LED-XD PWB
PNL-602B
CPWBX1139MPSL
BQ
3-39
LED-XE PWB
PNL-602B
CPWBX1137MPSM
BP
3-504
Bezel Unit R
PNL-602B
DUNT-1927MPS8
CA
3-62
LED-YA PWB
PNL-602B
CPWBX1139MPSJ
BP
3-63
LED-YB PWB
PNL-602B
CPWBX1139MPSK
BP
3-64
LED-YC PWB
PNL-602B
CPWBX1139MPSH
BN