PN-L602B (serv.man10). Panel Setting Tool - Sharp Monitor User Guide / Operation Manual

pn-l602b (serv.man10) user guide / operation manual
Model
PN-L602B (serv.man10)
Pages
9
Size
419.02 KB
Type
PDF
Document
User Guide / Operation Manual
Brand
Device
Monitor / Panel Setting Tool
File
pn-l602b-sm10.pdf
Date

Read Sharp PN-L602B (serv.man10) User Guide / Operation Manual online

LCD MONITOR
TOUCH PANEL SETTINGS TOOL
OPERATION MANUAL
Version 1.0
Applicable models (as of March 2014)
PN-L703A/PN-L703B/PN-L603A/PN-L603B/PN-70TA3/PN-70TB3/PN-60TA3/PN-60TB3
(Available models differ according to region.)
2
E
Contents
Introduction ......................................................................3
System Requirements ..................................................3
Setting up the PC .............................................................4
Install ............................................................................4
Touch Panel Settings .......................................................5
How to configure settings .............................................5
Calibration ....................................................................6
Properties .....................................................................6
Uninstall ............................................................................8
Important Information
•   This software has been shipped after strict quality control and product inspection. If, however, you find any failure or 
malfunction, contact your product dealer.
•   Please understand that SHARP CORPORATION bears no responsibility for errors made during use by the customer or a 
third party, nor for any other malfunctions or damage to this software arising during use, except where indemnity liability is 
recognized under law.
•   Transcribing or duplicating part or all of this manual and/or this software without permission from our company is not 
permitted.
•   As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for 
product improvement without prior notice.
•   The contents or details may vary depending on the screen configuration and OS version, etc.
•   This manual does not contain basic operating instructions for Windows.
Trademarks
•   Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or 
other countries.
•   Intel, Celeron, and Intel Core 2 Duo are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the U.S.A. 
and other countries.
•   AMD, AMD Sempron, AMD Athlon, and combinations thereof are trademarks of Advanced Micro Devices, Inc.
•  All other brand and product names are trademarks or registered trademarks of their respective holders.
3
E
Introduction
This software is used to configure touch action settings in order to perform touch action on a computer connected to an 
applicable model. 
To perform touch action on a computer connected to an applicable model, this software must be installed on the computer.
System Requirements
OS
Windows 7 (32-bit or 64-bit version),  
Windows 8 (32-bit or 64-bit version), Windows 8.1 (32-bit or 64-bit version)
CPU
Intel Celeron or AMD Sempron 1.6 GHz or faster
Intel Core 2 Duo or AMD Athlon II X2 2.8 GHz or faster recommended
Memory
At least 2 GB
Free space on hard drive At least 100 MB
USB port
USB (2.0 compliant)
TIPS
•  Depending on the application software, touch operation may not be possible (for example, if the application processes mouse 
and other operations independently).
4
E
Setting up the PC
Install
Caution
•  This can only be done by a user with administrator authority.
•  If an older version of the touch panel settings tool is installed, remove (uninstall) the old version before installing the touch 
panel settings tool. (See page 8.)
•  Do not touch the touch panel when connecting the USB cable.
  If you touch the touch panel, it will lead to a malfunction. In this case, disconnect and then reconnect the USB cable.
1.  Start your PC.
2.  Exit all applications that are running.
3.  Connect the USB cable.
After it has been connected, the touch panel will be automatically recognized.
 
To the USB terminal
of the PC
USB cable
USB 1 port*
USB 2 port*
*  To use a touch panel with a computer connected to the bottom, connect to the USB 1 port. 
To use a touch panel with a computer connected to the side, connect to the USB 2 port. 
(Factory setting. Can be changed in TOUCH INPUT SELECT in the SETUP menu.)
4.  Insert the supplied CD-ROM into the CD-ROM drive of your PC.
5.  Open the CD-ROM drive in “Computer”.
6.  Double-click the “TouchPanel” folder, and then double-click the “Windows” folder.
7.  Double-click “Setup.exe”.
  When the “User Account Control” screen appears, click “Yes” (or “Allow”).
8.  Select the language for installation, and click “Yes”.
Follow the on-screen instructions to install the driver.
•  If the “Windows Security” screen appears, click “Install” (or “Install this driver software anyway”).
•  If the “Software Installation” screen appears, click “Continue Anyway”.
•  If the “SHARP Touch Panel Settings Tool Files in Use” screen appears, click “Continue”.
9.  When the installation finished screen appears, click “Close”.
This completes the installation of the touch panel settings tool.
Each time the PC is started, the touch panel settings tool will start automatically to enable the touch panel to be used.
The first time you use the touch panel, perform calibration (position adjustment). (See page 6.)
Page of 9
Display

Download Sharp PN-L602B (serv.man10) User Guide / Operation Manual

Here you can read online and download Sharp PN-L602B (serv.man10) User Guide / Operation Manual in PDF. PN-L602B (serv.man10) user guide / operation manual will guide through the process and help you recover, restore, fix, disassemble and repair Sharp PN-L602B (serv.man10) Monitor. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.