Read Sharp PN-L601 (serv.man5) Service Manual online
PN-L601B OUTLINE OF THE PRODUCT
1 – 1
CHAPTER 1. OUTLINE OF THE PRODUCT
1. SPECIFICATIONS
1 - 1. OUTLINE
*
1
Cannot be used simultaneously.
*
2
Does not support plug and play.
*
3
Temperature condition may change when using the display together with the optional equipments recommended by SHARP.
In such cases, please check the temperature condition specified by the optional equipments.
In such cases, please check the temperature condition specified by the optional equipments.
*
4
In addition, check the requirements of the computer and other devices to be connected, and make sure that all requirements are satisfied.
*
5
When “AUTO INPUT CHANGE” is set to “OFF”.
*
6
When “STANDBY MODE” is set to “STANDARD”. When “STANDBY MODE” is set to “LOW POWER”: 1.0 W
Model
PN-L601B
LCD component
60" Class [60-1/16 inch (152.5cm) diagonal] TFT LCD
Max. resolution (pixels)
1920 x 1080
Max. colors
Approx. 1.06 billion colors
Pixel pitch
0.692 mm (H) x 0.692 mm (V)
Viewing angle
160° right/left/up/down (contrast ratio>10)
Screen active area inch (mm)
52-5/16 x 29-7/16 (1329.1 x 747.6)
Computer input signal
n
Digital (DVI 1.0 standard-compliant)
n
Analog RGB (0.7 Vp-p) [75
Ω]
Sync signal
n
Horizontal/vertical separate (TTL: positive/negative)
n
Sync-on-green
n
Composite sync (TTL: positive/negative)
Video color system
NTSC (3.58MHz)/NTSC (4.43MHz)/PAL/PAL-60/SECAM
Plug and play
VESA DDC2B
Power management
n
VESA DPMS
n
DVI DMPM
Input terminals
PC/AV
Digital
HDMI x 1
PC
Analog
Mini D-sub 15 pin, 3 rows x 1
Audio
3.5 mm mini stereo jack x 1
Serial (RS-232C)
D-sub 9 pin x 1
When PN-ZB01
(optional) is attached
PC/AV
Digital
DVI-D 24 pin (HDCP compatible) x 1
PC
Analog
BNC
*1*2
x 1
AV
Composite video
BNC x 1
S-video
x 1
Component
BNC (Y, Cb/Pb, Cr/Pr)
*1
x 1
Audio
RCA pin (L/R) x 2
Output terminals
Audio
RCA pin (L/R) x 1
Serial (RS-232C)
D-sub 9 pin x 1
When PN-ZB01
(optional) is attached
PC/AV
Digital
DVI-D 24 pin x 1
External speaker
10 W + 10 W [6
Ω]
LAN terminal [When PN-ZB01 (optional) is attached]
10 BASE-T/100 BASE-TX
Speaker output
10 W + 10 W
Touch Panel
Detection method
Infrared blocking detection method
Detection area inch (mm)
52-5/16 x 29-7/16 (1329.1 x 747.6)
PC connector
USB (1.1 compliant)
Power supply
Supplied from USB
Touch pen
Ultrasonic communication method
Power requirement
AC 100 V - 240 V, 50/60 Hz
Operating temperature
*3*4
41°F to 95°F (5°C to 35°C)
Operating humidity
*4
20% to 80% (no condensation)
Power consumption (No audio input/maximum/input
signal waiting mode
*5
/standby mode
*6
)
235 W / 240 W / 2.0 W / 2.0 W
When PN-ZB01 (optional) is attached
240W/245W/5.0W/4.5W
Dimensions (excluding protrusions) inch (mm)
Approx. 55-5/8 (W) x 5-3/16 (D) x 32-11/16 (H) (1,413 x 131 x 831)
Weight lbs. (kg)
Approx. 112.4 (51)
When PN-ZB01 (optional) is attached
Approx. 114.6 (52)
Click on the first or last page to see other PN-L601 (serv.man5) service manuals if exist.