Read Sharp PN-K322BH (serv.man3) Service Manual online
PN-K321/K322B INSTALLATION, ADJUSTMENT, SETTING 2 - 3
1 – 3.CONNECTING PERIPHERAL EQUIPMENT
（Caution）
• Be sure to turn off the main power switch and disconnect the
plug from the power outlet before connecting/disconnecting
cables. Also, read the manual of the equipment to be
connected.
• Be careful not to confuse the input terminal with the output
terminal when connecting cables. Accidentally reversing cables
connected to the input and output terminals may cause
malfunctions and the other problems.
•Do not use any cable that has a damaged or deformed terminal.
Using such a cable may cause malfunctions.
•Images may not be displayed properly depending on the
computer (video cards), cables, or peripheral devices to be
connected.
(MEMO)
The audio input terminals used in each input mode are
factory-set as follows.
Input
mode
Audio input terminal (Factory
setting)
DisplayPort
DisplayPort input terminal
HDMI1[PC]、HDMI1[AV]、
HDMI2[PC]、HDMI2[AV]
PC/AV HDMI input terminal
Connection with a PC or AV equipment
1
RS-232C input terminal
The monitor can be connected to a PC using the RS-232C conversion cable (supplied) and
a commercially available RS-232C straight cable to control the monitor from the PC.
2
PC/AV HDMI1 input terminal
•Use a commercially available HDMI cable (Ver. 1.4a compatible, High Speed cable
compliant).
•Set HDMI1, HDMI2, or HDMI DUAL in INPUT SELECT on the SETUP menu according to
the device to be connected.
•
Please select the audio input terminal to be used in the Settings menu of the "Audio
Settings", "HDMI1 [AV]", "HDMI1 [PC]", "HDMI2 [AV]" and "HDMI2 [PC]". For HDMI,
connect to the audio input terminal is not required.
3
PC/AV HDMI2 input terminal
4
DisplayPort input terminal
• Use the supplied DisplayPort cable (Ver. 1.2 HDR2 compatible).
•Select the audio input terminal to be used in DisplayPort of AUDIO SELECT on the SETUP
menu.
When DisplayPort is selected, connection to the audio input terminal is unnecessary.
* Use the supplied cable.
* If you need to extend the cable, consult your dealer.
5
Audio input terminal
• Use a commercially available audio cable (mini stereo jack) without resistance.
•Set the audio input terminal used for each input mode in AUDIO SELECT on the SETUP
menu.
6
Headphone tarminal
• Use commercially available headphones (mini stereo jack).
• The output sound varies depending on the input mode.
• The volume can be adjusted using the volume adjustment.
(MEMO)
• The length of the signal cables or surrounding environment may affect the image quality.
• Video output is disabled in the following cases:
When the power is turned off
When the monitor is in input signal waiting mode
Click on the first or last page to see other PN-K322BH (serv.man3) service manuals if exist.