PN-K321 (serv.man6) - Sharp Monitor User Guide / Operation Manual. Page 21

21

E

n

Residual images are reduced by moving the screen.

OFF ................. SCREEN MOTION function is disabled.

PATTERN1 ...... A black screen spreads from the bottom of the screen and then 

shrinks to the bottom of the screen. If the monitor is installed in the 

portrait orientation, a black screen spreads from the left end of the 

screen and then shrinks to the left end of the screen.

PATTERN2 ...... A black bar moves from the left end to the right end of the screen. 

If the monitor is installed in the portrait orientation, a black bar 

moves from the top to the bottom of the screen.

Specify a time period (operating interval) until SCREEN MOTION starts.

Specify a time period during which SCREEN MOTION operates (time period during which the screen will move).

POWER MANAGEMENT
POWER MANAGEMENT determines whether or not to switch modes from no signal to the input signal standby mode.
SIZE
Changes the screen size. (See page 17.)
MUTE AUDIO
Temporarily mutes the sound. The sound is restored when OFF is selected.

* If using the monitor buttons, hold both [MENU/ENTER] button and [VOL-/   ] button at the same time.
INFORMATION
Shows information about the monitor.

When a button other than [VOL+/   ]/[VOL-/   ] button, brightness adjustment button (  /  ) is pressed, or if no action is 

taken for 15 seconds, the display disappears.

TIPS

•  When WHITE BALANCE is set to THRU, BLACK LEVEL, CONTRAST, TINT, COLORS, RGB INPUT RANGE, GAMMA, 

PRESET, USER and COPY TO USER cannot be set.

•  If COLOR MODE is set to sRGB, the following items cannot be set. 

WHITE BALANCE, PRESET, USER, COPY TO USER, and GAMMA

•  When the COLOR MODE is set to VIVID, GAMMA can not be adjusted.

PATTERN2

PATTERN1