Read Sharp PN-K321 (serv.man5) User Guide / Operation Manual online
8
E
• When installing, removing or moving the monitor, ensure that this is carried out by at least 2 people.
• Be sure to use a wall-mount bracket designed or designated for mounting the monitor.
• This monitor is designed to be installed on a concrete wall or pillar. Reinforced work might be necessary for some materials
• Be sure to use a wall-mount bracket designed or designated for mounting the monitor.
• This monitor is designed to be installed on a concrete wall or pillar. Reinforced work might be necessary for some materials
such as plaster / thin plastic board / wood before starting installation.
This monitor and bracket must be installed on a wall which can endure at least 4 times or more the weight of the monitor.
Install by the most suitable method for the material and the structure.
This monitor and bracket must be installed on a wall which can endure at least 4 times or more the weight of the monitor.
Install by the most suitable method for the material and the structure.
• To attach a VESA-compliant mounting bracket, use M6 screws that are 5/16 inch (8 mm) to 3/8 inch (10 mm) longer than the
thickness of the mounting bracket.
• Do not use an impact driver.
• When moving the monitor, be sure to hold it with the unit bottom and the side of unit. Do not hold the LCD panel or corners.
• When moving the monitor, be sure to hold it with the unit bottom and the side of unit. Do not hold the LCD panel or corners.
This may cause product damage, failure, or injury.
• Do not use any screw holes other than VESA holes for installation.
Model
PN-K321H
Power requirement
AC 100 V - 240 V, 50/60 Hz (when using the supplied AC adapter)
Operating temperature
32°F to 104°F (0°C to 40°C)
Operating humidity
20% to 80% (no condensation)
Power consumption
93 W * (when using the supplied AC adapter)
Dimensions (excluding protrusions)
inch (mm)
Approx. 29-17/32(W) x 1-25/64(D) x 17-3/8(H) (750 x 35 x 441) (monitor only)
Approx. 29-17/32(W) x 10-3/32(D) x 19-17/64~24-31/32(H)
(750 x 256 x 489~634) (monitor on supplied stand)
Weight
lbs. (kg) Approx. 16.5 (7.5) (monitor only)
Approx. 28.7 (13.0) (monitor on supplied stand)
* When using the monitor in DC19.5 V : 87 W
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement
without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from
these values in individual units.
Specifications
Mounting Precautions (For SHARP dealers and service engineers)
Click on the first or last page to see other PN-K321 (serv.man5) service manuals if exist.