PN-K321 (serv.man5). Setup Manual - Sharp Monitor User Guide / Operation Manual. Page 8

Read Sharp PN-K321 (serv.man5) User Guide / Operation Manual online

6
E
Connections
Caution
•  Be sure to turn off the main power switch and disconnect the plug from the power outlet before connecting/disconnecting 
cables. Also, read the manual of the equipment to be connected.
•  Be careful not to confuse the input terminal with the output terminal when connecting cables. Accidentally reversing cables 
connected to the input and output terminals may cause malfunctions and the other problems.
•  Do not use any cable that has a damaged or deformed terminal. Using such a cable may cause malfunctions.
•  Images may not be displayed properly depending on the computer (video cards), cables, or peripheral devices to be 
connected.
For power outlet
4
5
6
7
2
3
1
TIPS
•  Set the audio input terminal to be used in AUDIO SELECT on the SETUP menu. The factory settings are shown below.
Input mode
Audio input terminal (Factory setting)
DisplayPort
DisplayPort input terminal
•  The cables connected to the terminals on the rear of the monitor can be fastened with the cable clamp. 
Attach the cable clamps to the attachment parts on the back of the monitor and the stand, and bind the cables.
Stand
Cable
Cable
Cable clamp (small)
Cable
Cable clamp
Cable clamp (large)
Cable clamp
 attachment
Cable clamp 
attachment
Cable clamp 
attachment
•  DisplayPort is a registered trademark of Video Electronics Standards Association.
  1.  Main power switch
  2.  AC input terminal
  3.  Power cord (Supplied)
  4.  RS-232C input terminal
  5.  DisplayPort input terminal
  6.  Audio input terminal
  7.  Headphone terminal
Page of 44
Display

Click on the first or last page to see other PN-K321 (serv.man5) service manuals if exist.