PN-G655E (serv.man5) - Sharp Monitor User Guide / Operation Manual. Page 37

ENGLISH

E

35



VESA

Wide

US TEXT
Sun

640 x 480

800 x 600

848 x 480

1024 x 768

1152 x 864
1280 x 768

1280 x 960

1280 x 1024

1360 x 768

1600 x 1200

*1

1280 x 720

1920 x 1080

720 x 400

1024 x 768

1152 x 900

1280 x 1024

1600 x 1000

31.5 kHz
37.9 kHz
37.5 kHz
35.1 kHz
37.9 kHz
48.1 kHz
46.9 kHz
31.0 kHz
48.4 kHz
56.5 kHz
60.0 kHz
67.5 kHz
47.8 kHz
60.3 kHz
60.0 kHz
64.0 kHz
80.0 kHz
47.7 kHz
75.0 kHz
44.7 kHz
66.3 kHz
31.5 kHz
48.3 kHz
53.6 kHz
56.6 kHz
61.8 kHz
71.8 kHz
71.7 kHz
81.1 kHz
68.6 kHz

60 Hz
72 Hz
75 Hz
56 Hz
60 Hz
72 Hz
75 Hz
60 Hz
60 Hz
70 Hz
75 Hz
75 Hz
60 Hz
75 Hz
60 Hz
60 Hz
75 Hz
60 Hz
60 Hz
60 Hz
60 Hz
70 Hz
60 Hz
66 Hz
70 Hz
66 Hz

76.2 Hz
67.2 Hz

76 Hz
66 Hz

25.175 MHz

31.5 MHz
31.5 MHz
36.0 MHz
40.0 MHz
50.0 MHz
49.5 MHz

33.75 MHz

65.0 MHz
75.0 MHz

78.75 MHz
108.0 MHz

79.5 MHz

102.25 MHz

108.0 MHz
108.0 MHz
135.0 MHz

85.5 MHz

162.0 MHz

74.4 MHz

148.5 MHz

28.3 MHz

64.13 MHz

70.4 MHz

74.25 MHz
94.88 MHz

108.23 MHz
117.01 MHz
134.99 MHz
135.76 MHz

Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes

Yes
Yes
Yes

-

Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes

-
-
-
-
-
-
-
-

*1  Displays a reduced image.

*  All are compliant only with non-interlaced.

*  Depending on the connected PC, images may not be displayed properly even if the compatible signal described above is input.

*  The frequency values for the Sun are reference values. A separate conversion adapter (commercially available) may be required for 

connecting the monitor to the Sun.



Note that the values shown are approximate values.

20

Opening height (807)

Opening width (1432)

Unit: mm

1572

126

7

1485

860

20

923

85

85

650

440

393

Screw holes for 

mounting brackets 

(M10 x 4 holes)

595

155

  When mounting the monitor, read the manual of the brackets or stand for their mounting procedure. The screw holes for 

mounting brackets (M10 x 4 holes) are provided on the rear of the monitor.

  Note that screw hole depth of the monitor is 20 mm. Loose holding may cause the product to fall, resulting in serious personal 

injuries as well as damage to the product. The screw and hole should come together with over 10 mm length of thread. 

SHARP recommends using mounting interface that comply with UL1678 standard.