Read Sharp PN-E702 (serv.man3) Service Manual online
CHAPTER 6. DISASSEMBLY AND ASSEMBLY
PN-E702/E602 DISASSEMBLY AND ASSEMBLY
6 – 23
2 ) Remove six screws A (M3 x 6, Silver), and remove the IF tray angle L/R. Remove eight screws B (M4 x 6, Silver), and remove two the stand
angle.
CAUTION
SCREW TIGHTENING TORQUE
n
Screw A, B: 0.7 - 0.9N•m
3 ) Remove one screw A (M3 x 4, Silver), and remove the tray support plate. Remove seven screws B (M4 x 6, Silver) and two screws C (M3 x 6,
Silver), and remove three IF angles. Remove four screws D (hex M3, Silver) and two screws E (hex, M3, Black).
CAUTION
NOTE FOR ASSEMBLY
n
Referring to figures A and B, use enough care not to mistake the installing positions.
SCREW TIGHTENING TORQUE
n
Screw A: 0.4 - 0.5N•m
n
Screw B: 0.9 - 1.1N•m
n
Screw C: 0.7 - 0.9N•m
n
Screw D, E: 0.55 - 0.65N•m
Hook section
A x 6
Screw
IF tray angle L
IF tray angle R
B x 8
Screw
Stand angle x 2
A x 1
Screw
Tray support plate
IF angle x 3
C x 2
Screw
B x 7
Screw
D x 4
Hexagon
screw
E x 2
Hexagon
screw
Gasket
Chart A
Gasket(back side)
Gasket(back side)
Chart B
Click on the first or last page to see other PN-E702 (serv.man3) service manuals if exist.