Read Sharp PN-E471R (serv.man3) Service Manual online
CHAPTER 7. PN-E601/E521 DISASSEMBLY AND ASSEMBLY
PN-E Series PN-E601/E521 DISASSEMBLY AND ASSEMBLY
7 – 6
4. SHIELD PLATE ASSY
1 ) Unscrew 4pcs of ScrewC (M3 x 8s/sw (Silver)), and remove the Heat sinkD (PN-E601 Only). Unscrew 10pcs of Screw A (M3 x 6 (Silver)) ,
14pcs of Screw B (M4 x 6 (Silver)), 2pcs of Screw E (M3 x 8s/sw (Silver)), and remove the Shield Plate Assy.
CAUTION
NOTE FOR ASSEMBLY
n
Be careful not to get the harness wire caught.
n
Make sure the locating points of Shield Plate (both sides) are engaged.
n
Tighten the screw A in the sequence of
1, 2, 3,and 4.
SCREW TIGHTENING TORQUE
n
Screw A, Screw C : 0.7 - 0.9N •m
n
Screw B: 0.9 - 1.1N •m
SHIELD PLATE ASSY
n
It is different in shape between PN-E601 and PN-E521. Not compatible.
A
Screw
x 10
E
Screw
x 2
B
Screw
x 14
Locating
points
points
Locating
points
points
2
1
3
D
4
Bottom
side
side
PN-E601 Only
Click on the first or last page to see other PN-E471R (serv.man3) service manuals if exist.