Read Sharp PN-A601 (serv.man5) User Guide / Operation Manual online
14
E
■ Connection with the control kit (optional)
Caution
• When attaching the remote control sensor box, turn the
main power switch OFF.
• Except for the remote control sensor box connection cable,
do not insert any other cable into the control kit terminal.
Also, do not connect any connection cables that have been
extended with commercially available cables.
1. Insert the remote control sensor box connection cable
into the control kit terminal.
Connection cable
Control kit terminal
Remote control
sensor box
TIPS
• When connecting the control kit, select whether to use the
remote control sensor and the brightness sensor on the
remote control sensor box or the monitor with CONTROL
KIT SETTING on the SETUP menu.
When attaching the remote control sensor box to this
monitor
Attach the remote control sensor box to the location shown in
the following illustration;
For the monitor in
landscape orientation
For the monitor in
portrait orientation
1. Unscrew the screw in the monitor’s remote control
sensor box mounting hole.
2. Secure the mounting bracket by screwing the screw
removed in Step 1. in the monitor’s remote control
sensor box mounting hole.
3. Adjust the angle of the remote control sensor box, and
secure it with the fixing screw, so that it may accurately
receive signals from the remote control unit.
Angle
adjustment
Mounting bracket
Screw (Screw
removed from
the remote control
sensor box
mounting hole)
Fixing screw
Remote control
sensor box
Remote control sensor box
mounting hole
TIPS
• Depending on where it has been placed or the surrounding
conditions, the remote control sensor box may be
affected by the brightness of the main unit screen and the
brightness sensor may respond.
• The brightness sensor may not function properly in
extremely bright or dark locations.
Connecting Peripheral Equipment
Click on the first or last page to see other PN-A601 (serv.man5) service manuals if exist.