Read Sharp PN-A601 (serv.man3) Service Manual online
CHAPTER 6. DISASSEMBLY AND ASSEMBLY
PN-A601 DISASSEMBLY AND ASSEMBLY
6 – 15
2 ) Remove the clamp (which is attached to the PWB fixing angle) together with the harness. Remove thirteen screws (M3 x 6, Silver) and remove
the PWB fixing angle.
CAUTION
NOTE FOR ASSEMBLY
n
Fix the screws in the sequence of
1 --> 3, and fix the other positions.
SCREW TIGHTENING TORQUE
n
0.55 - 0.65N•m
3 ) Disconnect the connector at 4 positions. Remove 10 screws (M3 x 6, Silver) and remove the LED DRV PWB.
CAUTION
NOTE FOR ASSEMBLY
n
Insert the hook into the hole in the LED DRV PWB and fix.
n
Fix the screws in the sequence of
1 --> 2, and fix the other positions.
SCREW TIGHTENING TORQUE
n
0.55 - 0.65N•m
Screw x 13
Connector x 4
Screw x 10
Hook section
Hook section
Click on the first or last page to see other PN-A601 (serv.man3) service manuals if exist.