Read Sharp PN-70TB3 (serv.man6) User Guide / Operation Manual online
ENGLISH
7
E
Turning Power On/Off
Caution
• Turn on the monitor first before turning on the computer or
playback device.
• To keep the performance of the WHITEBOARD stable, put
the monitor in the Power off (Standby mode) state once a
day.
Turning on the main power
Main power switch
The monitor enters the Power off (Standby mode) state.
Caution
• The main power must be turned on/off with the main power
switch. Do not connect/disconnect the power cord or turn
the breaker on/off while the main power switch is on.
• When switching the main power switch or the POWER
button off and back on, always wait for at least 5 seconds.
• For a complete electrical disconnection, pull out the main
plug.
• Before switching off the main power switch, always put the
monitor in the Power off (Standby mode) state. (Hold down
the POWER button until the exit screen appears.)
Turning power on
1. Press the POWER button.
POWER button / Power LED
Status
Status of the monitor
Green lit
Power on
Orange lit
Power off (Standby mode)
Orange flashing
Power off
(Whiteboard standby mode)
Green flashing
Input signal waiting mode
• The WHITEBOARD appears.
(Factory setting. Can be changed in START INPUT MODE
in the SETUP menu.)
Click on the first or last page to see other PN-70TB3 (serv.man6) service manuals if exist.