Read Sharp PN-70TB3 (serv.man2) Handy Guide online
(1) Touch “Manually Add >” button.
12.
Printer settings
(Select printer manually)
(Select printer manually)
ex)Model Name (Required):「MX-5111FN」
IP Address (Required):「192.168.11.108」
Name:「MFP1」
Location:「room1」
Port Settings:-Default-
Black and White Print:―Default―
IP Address (Required):「192.168.11.108」
Name:「MFP1」
Location:「room1」
Port Settings:-Default-
Black and White Print:―Default―
(5) Touch “Printing Policy” button.
(2) Input printer settings properly and touch “OK”
Button.
Button.
(3) Confirm that selected printer is added on the
right-side list box, then press “OK” button.
(ex.) [SHARP MX-5111FN…]
right-side list box, then press “OK” button.
(ex.) [SHARP MX-5111FN…]
(6) Select necessary item on check box, and
touch “OK” button.
(*)The initial values are all check OFF. Please tap
“Defaults” button to reset to their initial values.
touch “OK” button.
(*)The initial values are all check OFF. Please tap
“Defaults” button to reset to their initial values.
(7) Regarding Punch Module, touch “Punch Module”
list box.
list box.
(8) Select any module as needed.
(*) The initial value is “None”.
(9)Touch “OK” button.
Before the installation of the printer, please confirm that the
white board connected to the same network.
white board connected to the same network.
If you close the setting, go to the step 10.
Click on the first or last page to see other PN-70TB3 (serv.man2) service manuals if exist.