Read Sharp PN-70TA3 (serv.man13) User Guide / Operation Manual online
44
E
Customizing the Settings
You can customize various settings of this software.
The settings are the same in both whiteboard mode and overlay mode. However, the contents of the screen will vary depending
on which mode is started.
TIPS
• If “Share software settings with all users” is selected during installation, the settings will be the same for all users.
1. Touch the “Settings” button (
) on the toolbar.
2. Set the options as necessary. (See below.)
3. When you finish adjusting the settings, touch “OK”.
3. When you finish adjusting the settings, touch “OK”.
n
Basic Settings
TIPS
• When this software is restarted or new boards are created / added, setting will be reflected.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(1) Menu
Select “Square Menu” or “Classic Menu” for the menu format. (Page 8, 12)
(2) Icon Size
Set the icon size to “Large” or “Small”.
(3) Touch Pen
Select the pen to use from “2 Button Pen Only” (full version only), “3 Button Pen Only”, or “Finger or Other Pen”.
Select “Finger or Other Pen” when using a passive pen, a digitizer pen, or a finger.
Available items vary according to the models.
Select “Finger or Other Pen” when using a passive pen, a digitizer pen, or a finger.
Available items vary according to the models.
(4) Dual-Touch Gesture
Set whether dual touch is enabled. When enabled, the following actions are possible:
• “Zoom” can be used to change the sheet display magnification, and two-finger drag can be used to change the display
position (Page 34).
• Two-finger left/right drag can be used to change the sheet (Page 17).
TIPS
• Dual touch cannot be used in Windows Vista.
• When using a PN-L series (excluding the PN-L603A/PN-60TA3/PN-L703A/PN-70TA3/PN-L603B/PN-60TB3/PN-L703B/
• When using a PN-L series (excluding the PN-L603A/PN-60TA3/PN-L703A/PN-70TA3/PN-L603B/PN-60TB3/PN-L703B/
PN-70TB3), set “Touch Mode Setting” of the touch panel driver to “Dual”, and “Input Mode Setting” to “Standard” or
“HandWrite”.
When using the PN-L603A/PN-60TA3/PN-L703A/PN-70TA3/PN-L603B/PN-60TB3/PN-L703B/PN-70TB3, set “Touch
Operation Mode” of the touch panel settings tool to “Multi-Touch Mode”, and “Input mode” of the touch pen utility* to
“Standard” or “Handwriting”.
* This is required when using 3 button pen (sold separately) with the PN-L603B/PN-60TB3/PN-L703B/PN-70TB3.
• Dual touch may not operate correctly in the following cases:
Touching is too quick.
The distance between the two points is too short.
The two points intersect.
The points are aligned horizontally or vertically.
Click on the first or last page to see other PN-70TA3 (serv.man13) service manuals if exist.