Read Sharp PN-70TA3 (serv.man13) User Guide / Operation Manual online
5
E
Pen Software modes and how to start the modes
n
Full version
TIPS
• The LL-S and PN-K series do not support the use of a secondary display.
To use a secondary display with the PN-L series, please refer to page 43 of this manual.
• When changing the mode, touch the “Board list” button (
) and add a new board. (Page 16)
• To prevent the Windows taskbar from moving, lock it.
• Set the screen resolution to 1920 x 1080 (3840 x 2160 for PN-K series) and the screen color to 32 bits.
• The work area is displayed for each “sheet”. By changing the sheet, you can edit data on another screen.
• If the software was not shut down normally the previous time, the dialog box to restore backup data appears when the
software is launched.
Whiteboard mode
You can use the screen as a whiteboard.
Up to 4 sheets can be opened.
Board list
Starting whiteboard mode
Follow the steps below to start the software.
Follow the steps below to start the software.
• On the desktop, touch the “Pen Software” shortcut icon (
) twice quickly (or double-click the icon).
• Click the “Start” button, and then select “All Programs” - “SHARP Pen Software” - “Pen Software”.
• Touch a whiteboard file (a file saved in the SWSX format) twice quickly (or double-click the file).
• In Windows 8/8.1, launching is also possible from the Start screen and the Apps screen.
• Touch a whiteboard file (a file saved in the SWSX format) twice quickly (or double-click the file).
• In Windows 8/8.1, launching is also possible from the Start screen and the Apps screen.
Overlay mode
The board is shown as transparent.
Your drawing will appear on the transparent board placed over the screen, so that you can write comments directly on the items
displayed on the screen. Note, however, that you cannot operate the screen shown behind the transparent board.
Only 1 sheet can be opened.
Board list
Starting overlay mode
Follow the steps below to start the software.
Follow the steps below to start the software.
• On the desktop, touch the “Overlay mode Pen Software” shortcut icon (
) twice quickly (or double-click the icon).
• Click the “Start” button, and then select “All Programs” - “SHARP Pen Software” - “Overlay mode Pen Software”.
• Touch an overlay board file (a file saved in SWSO format) twice quickly (or double-click the file).
• In Windows 8/8.1, launching is also possible from the Start screen and the Apps screen.
• Touch an overlay board file (a file saved in SWSO format) twice quickly (or double-click the file).
• In Windows 8/8.1, launching is also possible from the Start screen and the Apps screen.
Starting and Exiting the Software
Click on the first or last page to see other PN-70TA3 (serv.man13) service manuals if exist.