PN-655E. Service information - Sharp Monitor Handy Guide

pn-655e handy guide
Model
PN-655E
Pages
2 Few pages! See other manuals at the bottom of the first or last page.
Size
195.51 KB
Type
PDF
Document
Handy Guide
Brand
Device
Monitor / Service information
File
pn-655e.pdf
Date

Read Sharp PN-655E Handy Guide online

IDP Repair – Checklist 
 
Unit received in a working condition 
If the unit has power, capture the “Log” details using the model specific application – Service Tool 
If you are unfamiliar with the application or have not yet installed the program, please refer to the 
operation manual provided with the “Service Tool” application. 
 
 
Read and extract the “Get All Reports” operation log of the display 
Run – InfoDisp Report 
 
Read and note in a text file the “Usage Time” of the display 
Run – Usage Time 
 
Read and save the “White balance” settings for the display 
Run – White Balance 
 
If available, read and save the “Gamma” settings for the display 
Run – Gamma 
 
For PN-L units, check and save the “LED and sensor check” data 
Run – LED/Sensor 
 
Read and note in a text file the “Serial Number” of the display 
Run – Serial Number 
 
Store all files locally and compress (ZIP) all of the files 
All of the data needs to be held locally by the service contractor should this be required in 
the future 
 
Send the ZIP file and model / fault details to – 
  
 
 
 
Preparation for despatch 
After the unit has been tested and confirmed as working, you need to load the model specific 
application – Service Tool 
If you are unfamiliar with the application or have not yet installed the program, please refer to the 
operation manual provided with the “Service Tool” application. 
Only if you have replaced the I/F PWB or the EEPROM, you will need to re-write ALL data (O). 
 
 
Write the “Firmware” to the display 
Run – Main Firmware 
 
If the unit has an OPTION BOARD fitted, write the “PN-ZBxx Firmware” 
Run – PN-ZBxx Firmware 
 
For PN-L units, write the “Touch Panel Firmware” to the display 
Run – TouchPanel FIrmware 
 
Reset the unit 
Check the service manual and perform a factory reset 
 
Write the “Usage Time” of the display 
Run – Usage Time 
 
For PN-V units, reset the “Bright Reset” settings on the unit 
Run – Panel Data Reset 
 
If required, write the “White balance” settings for the display (O) 
Run – White Balance 
 
For PN-L units If required, write the “Gamma” settings for the display (O) 
Run – Gamma 
 
If required, write the “Serial Number” of the display (O) 
Run – Serial Number 
 
If required, write the “Monitor Temperature” of the display (O) 
Run – Temp Watch 
 
If required perform “Flicker Adjustment” (O) 
Run – Flicker Adjustment 
 
Page of 2
Display

Download Sharp PN-655E Handy Guide

Here you can read online and download Sharp PN-655E Handy Guide in PDF. PN-655E handy guide will guide through the process and help you recover, restore, fix, disassemble and repair Sharp PN-655E Monitor. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.