Read Sharp PN-655E (serv.man3) Service Manual online
PN-655E
OUTLINE OF THE PRODUCT, NOMENCLATURE AND FUNCTION
1 – 6
■
Switching the screen size
(When the input mode is COMPONENT/VIDEO)
The desired screen size can be selected to suit the input signal.
Even when the screen size is changed, the display may remain the
Even when the screen size is changed, the display may remain the
same depending on the input signal.
*If “DotbyDot” is selected when the VIDEO or COMPONENT (480i or
480p) image is displayed, the image quality cannot be changed by
adjusting the value of “SHARPNESS” from the VIDEO ADJUST-
adjusting the value of “SHARPNESS” from the VIDEO ADJUST-
MENT menu.
Notes: • Using this monitor’s screen-size switching or dual-screen dis-
play functions to compress or expand the screen for commer-
cial or public viewing in establishments like cafes or hotels
may infringe on the rights of the creators, as protected by
Copyright Law, so please be careful.
• When using the screen-size switching function of this monitor,
the appearance of the original video may change if you select
a screen size with a different aspect ratio than the original
image (e.g. TV broadcast or video input from external equip-
ment). Please consider this point when selecting the screen
size.
• When an ordinary non-wide image (4 : 3) is viewed with the
whole screen using the screen-size switching function of this
monitor, the edge of the image may be lost or appear dis-
torted. If you wish to respect the creator’s intentions, set the
screen size to “NORMAL”.
• When playing commercial software, parts of the image (like
subtitles) may be cropped. In this case select the optimal
screen size using the screen-size switching function of this
monitor. With some software, there may be noise or distortion
monitor. With some software, there may be noise or distortion
at the edges or top of the screen. This is due to the character-
istics of the software, and is not a malfunction.
• Depending on the original image size (e.g. CinemaScope
size), black bands may remain at the top and bottom of the
screen.
WIDE:
Displays the image of the aspect ratio of 4:3 so it fills the entire
screen by stretching the image.
screen by stretching the image.
ZOOM 1:
Displays the image of the aspect ratio of 4:3 so it fills the entire
screen with the same aspect ratio. The upper and lower portion of
the image may be cut off.
screen with the same aspect ratio. The upper and lower portion of
the image may be cut off.
ZOOM 2:
Use this size if ZOOM 1 cuts off the subtitles.
NORMAL:
Displays the entire image of the aspect ratio of 4:3 without
changing the aspect ratio.
changing the aspect ratio.
Dot by Dot:
Displays the dots of the input signals as the corresponding dots on
the screen.
the screen.
*
WIDE
ZOOM1
NORMAL
DotbyDot
ZOOM2
Click on the first or last page to see other PN-655E (serv.man3) service manuals if exist.