Read Sharp PN-60TB3 (serv.man9) User Guide / Operation Manual online
17
E
Caution
• Turn on the monitor first before turning on the computer or
playback device.
• To keep the performance of the WHITEBOARD stable, put the
monitor in the Power off (Standby mode) state once a day.
Turning on the main power
Main power switch
The monitor enters the Power off (Standby mode) state.
Caution
• The main power must be turned on/off with the main power
switch. Do not connect/disconnect the power cord or turn
the breaker on/off while the main power switch is on.
• When switching the main power switch or the POWER
button off and back on, always wait for at least 5 seconds.
• For a complete electrical disconnection, pull out the main
plug.
• Before switching off the main power switch, always put the
monitor in the Power off (Standby mode) state. (Hold down
the POWER button until the exit screen appears.)
Turning Power On/Off
Turning power on
1. Press the POWER button.
POWER button / Power LED
Status
Status of the monitor
Green lit
Power on
Orange lit
Power off (Standby mode)
Orange flashing
Power off
(Whiteboard standby mode)
Green flashing
Input signal waiting mode
The screen that appears depends on the START INPUT
MODE setting in the SETUP menu.
• WHITEBOARD
The WHITEBOARD appears. (See page 27.)
• LAST INPUT MODE
The video of the input terminal when the power was last
turned off is displayed.
TIPS
• When the main power switch is off, the monitor cannot be
turned on.
• If the monitor is in input signal waiting mode and you press
the POWER button, the monitor enters whiteboard standby
mode. If you hold down the POWER button until the exit
screen appears, the monitor enters Power off (Standby
mode) state.
• Setting the SCHEDULE flashes the power LED alternately
in red and orange in standby mode.
• To disable the logo screen from displaying when turning the
power ON, set LOGO SCREEN to OFF on the OTHERS
menu. (See page 40.)
Click on the first or last page to see other PN-60TB3 (serv.man9) service manuals if exist.