Read Sharp PN-60TB3 (serv.man4) Service Manual online
PN-L703A/L703B, PN-70TA3/70TB3, PN-L603A/L603B, PN-60TA3/60TB3
OUTLINE OF THE PRODUCTS 1 - 10
3. PART NAMES AND FUNCTION
3 - 1.DISPLAY
■
Front view
* The Input switch and Power switch are located on the back of the monitor. Use the position of the slot on the front as a guideline for
operation of the switches. (The switch with the protrusion is the Power switch.)
(State the power light is lit)
Lighting Status
Status Description
Green lit.
Power on
Off lit.
Power off (Standby mode)
Greenflashing.
Input signal waiting mode
When switching the main power switch or the POWER button off and back on, always wait for at least 5 seconds. A short interval may
result in a malfunction.
LED lighting pattern
LED state
Monitor state
Main power OFF
Turn OFF
Power standby
Orange lights up
Main power ON
Green lights up
Whiteboard standby
Orange(3sec.) -> Turn OFF(1sec.) ->
Signal standby
Green -> Turn OFF ->
(1sec. interval)
(1sec. interval)
Power standby (Setting the schedule)
Orange -> Red ->
(1sec. interval)
(1sec. interval)
Whiteboard standby (Setting the
schedule)
schedule)
Orange(3sec.) -> Red(1sec.) ->
Power ON delay
Green -> Turn OFF ->
(0.5sec. interval)
(0.5sec. interval)
Hardware error occurs
Red -> Turn OFF ->
(1sec. interval)
(1sec. interval)
Hardware error occurs
Red -> Green ->
(1sec. interval)
(1sec. interval)
(CAUTION)
When the main power is turned ON/OFF, leave the monitor for five seconds.
If the interval of the time is less than five seconds, it causes the malfunction.
1
Power button / Power LED
2
Remote control sensor
3
TOUCH MENU button
4
Tray
5
Speakers
6
Handles (2 on the PN-L603A)
7
Infrared transmitter/receiver
Click on the first or last page to see other PN-60TB3 (serv.man4) service manuals if exist.