Read Sharp PN-60TB3 (serv.man2) Handy Guide online
3.
Turn on the power
Power button/Power LED
(1) Turn on the main power
switch.
Set a AAA battery in the touch pen and the AA
battery in the Remote Control Unit.
battery in the Remote Control Unit.
1.
Connect the touch pen adapter
2.
Prepare the touch pen and the Remote
control Unit
control Unit
Insert the touch pen adapter into the touch
pen adapter port on the backside of the
monitor.
pen adapter port on the backside of the
monitor.
(2) Push the power button.
4.
Set the operation mode
Easy Setup Guide for PN-70TA3/PN-60TA3
LED Status
Status of the monitor
Green
Power on
Orange
Power off(Standby mode)
Orange flashing
Power off
(Whiteboard standby mode)
(Whiteboard standby mode)
Green flashing
Input signal waiting mode
5.
Set the date/time of the monitor
Set the date and time by the remote control
unit.
unit.
Set the operation mode by the remote control
unit.
unit.
6.
Enable the system mode
(1) Touch a toolbar
in the launcher.
in the launcher.
(3) Enter password.
(2) Touch “Settings”
in the launcher menu.
in the launcher menu.
Enter the password set in admin password.
If a password is not set , enter “00000”
If a password is not set , enter “00000”
(5) Enter system password.
The monitor is automatically restarted in System
mode.
mode.
(4) Touch “System mode” on “System Settings” tab.
7.
Date and Time setting
(1) Touch “Date and Time” on “System Settings” tab.
(3) Touch “Change date and time...”
on “Date and Time” tab.
on “Date and Time” tab.
(2) Touch “Change time zone...”
on “Date and Time” tab.
on “Date and Time” tab.
Set date, time, and time zone.
Set the date and time.
Enter system password
Enter the password set in system password.
If a password is not set , enter “00000”
If a password is not set , enter “00000”
(2) Select the format.
8.
“Region and Language” settings
for the Operation System
for the Operation System
(1) Touch “Region and Language Settings” on
“System Settings” tab.
(3) Select the location.
(4) Select the keyboards and languages.
(5) Select the system locale according to
your language.
your language.
When the following message is displayed, click
“Apply” button to continue.
“Apply” button to continue.
When the following dialog is displayed, select your
own language.
own language.
After touching “OK” button, the following message is
displayed and touch “Cancel” button.
displayed and touch “Cancel” button.
[Note]
During the above steps, the following screen may be
displayed. In that case, keep pressing the power
button.
displayed. In that case, keep pressing the power
button.
Keep pressing the power button again in order to turn
off PN-L603A or PN-L703A.
After shutting down the system, turn on the system
again.
off PN-L603A or PN-L703A.
After shutting down the system, turn on the system
again.
[Note]
Do not click “Apply” button. If click “Apply button”, message of
“Logout” appears and click “Cancel” button.
Do not click “Apply” button. If click “Apply button”, message of
“Logout” appears and click “Cancel” button.
(1) Touch “Language” button.
9.
“Language” settings of SHARP
Software
Software
(2) Select your language.
If you select “English”, please select “SHARP
Cloud Portal Office” location settings.
Cloud Portal Office” location settings.
10.
Return to “Normal mode”
(3)Touch “Apply” button.
(1) Touch “Normal mode” button.
Whiteboard will be started.
(2) Enter system password.
Enter system password
If you need “Printer Setting” or “Scanner
Setting” ,skip the step 10 and go to the step 11,
step12, or step13.
Setting” ,skip the step 10 and go to the step 11,
step12, or step13.
[Note]
Enter the password set in system password.
If a password is not set , enter “00000”
If a password is not set , enter “00000”