Read Sharp PN-465E (serv.man3) Parts Guide online
PN-465E
CONNECTION, ADJUSTMENT, OPERATION, AND FUNCTION
2 – 4
1-5. HOW TO INSTALL THE MONITOR
■ Mounting precautions
• Since the monitor is heavy, consult your dealer before installation.
• When installing or moving the monitor, ensure that this is carried out
by at least 2 people.
• A stand and mounting bracket compliant with VESA specifications is
required. Do not use any screw holes other than VESA holes for
installation.
installation.
• When moving the monitor, be sure to hold it with the handles both on
the rear and the unit bottom. Do not hold the LCD panel. This may
cause product damage, failure, or injury.
• Install the monitor with the surface perpendicular to a level surface. If
necessary, limit the tilt between 0 and 20 degrees downward.
• Mounting the monitor on the wall requires special expertise and the
work must be performed by an authorized SHARP dealer. You should
never attempt to perform any of this work yourself. Our company will
bear no responsibility for accidents or injuries caused by improper
mounting or mishandling.
mounting or mishandling.
• This monitor should be used at an ambient temperature between 0°C
and 40°C. Provide enough space around the monitor to prevent heat
from accumulating inside.
*The monitor can be installed close to a wall, etc.
However, the monitor emits heat during operation. Be aware that
heat emitted from the monitor may discolour or alter the wall.
If it is difficult to provide such space because the monitor is
installed inside a housing or for other reasons, take other measures
to keep the ambient temperature between 0°C and 40°C such as
to keep the ambient temperature between 0°C and 40°C such as
installing a fan in the housing.
• Adhere to the following when installing the monitor in the vertical
orientation. Failing to adhere to the following may cause malfunc-
tions.
- Install the monitor such that the power LED is located on the
downside.
- Set the MONITOR on the SETUP menu to PORTRAIT.
• Do not block any ventilation openings. If the temperature inside the
monitor rises, this could lead to a malfunction.
• After mounting, it is recommended to take some measures to pre-
vent the monitor from falling down.
• Do not place the monitor on a device which generates heat.
• Be sure to use a stand or a wall-mount/ceiling-mount bracket
designed or designated for mounting the monitor.
For the monitor in
horizontal orientation
horizontal orientation
Unit: cm
For the monitor in
vertical orientation
vertical orientation
20
20
5
5
5
5
5
5
*
*
Click on the first or last page to see other PN-465E (serv.man3) service manuals if exist.