Read Sharp LL-T2015 Service Manual online
LL-T2015-B/H
CONNECTION, ADJUSTMENT, OPERATION, AND FUNCTIONS
2 – 1
CHAPTER 2. CONNECTION, ADJUSTMENT, OPERATION, AND FUNCTIONS
1. CONNECTING THE MONITOR AND TURNING THE MONITOR ON AND OFF
Caution:
• When connecting, ensure that both the monitor and computer are
switched off.
• Be careful not to over bend the cable or add extension cords as this
could lead to a malfunction.
Cable storage
If necessary, excess cable can be housed in the stand.
1.
Remove the cover.
Gently pull the top of the cover towards yourself.
2.
Run cable along the back of the stand.
3. Refit the cover.
Be careful not to pinch the cable.
• If the cover is hard to refit, do not force it.
Check whether cables are trapped.
1-1. Connecting the monitor to a computer
The accessory signal cable enables connection of two computers.
(One analog and one digital connection.)
(One analog and one digital connection.)
• The separately sold 2-input cable enables connection of two comput-
ers to the DVI-I input terminal.
• When using the 2-input cable, set the connecting input terminal
[INPUT-2] to [2LINES] under the MODE SELECT-2 Menu.
■
■
■
■
Analog connection
Connect the accessory analog signal cable, or separately-sold analog
signal cable (model name: NL-C02E) to the analog RGB output terminal
of the computer.
of the computer.
• Connect the accessory analog signal cable to the analog RGB input
terminal (INPUT-1).
• Connect the separately-sold analog signal cable (model name: NL-
C02E) to the DVI-I input terminal (INPUT-2).
• Paying attention to connector direction, firmly insert the signal cable
to terminal, and then tighten the screws at both sides.
Analog signal cable
Analog RGB output
terminal
terminal
DVI-I input terminal
(INPUT-2)
(INPUT-2)
Analog RGB
input terminal
(INPUT-1)
input terminal
(INPUT-1)
Click on the first or last page to see other LL-T2015 service manuals if exist.