LL-T2000 (serv.man11) - Sharp Monitor User Guide / Operation Manual. Page 20

MANUAL: Individual menu options are manually

adjusted.

AUTO:

Every menu option is automatically
adjusted

Press the   button to select AUTO.

To choose a menu option:

SELECT button

To go to MENU 2:

MENU button

CLOCK
The figure below demonstrates how to adjust so that
vertical flicker noise is not emitted. (    buttons)

PHASE
The figure below demonstrates how to adjust so that
horizontal flicker noise is not emitted. (    buttons)

Adjustments to PHASE should be made only
after CLOCK has been correctly set.

H-POS (horizontal positioning) and V-POS
(vertical positioning)
To center the screen image within the boundaries of
the screen, adjust the left-right (H-POS) values and
the up-down (V-POS) values. (    buttons)

MANUAL: Individual menu options are manually

adjusted.

AUTO:

Every menu option is automatically
adjusted using the Auto Gain Control*
function,

Press the   button to select AUTO.

To choose a menu option:

SELECT button

To go to MENU 3:

MENU button

*Auto Gain Control function

The Auto Gain Control adjusts contrast and
brightness based on the brightest color of the
image displayed. If you are not using the
Adjustment Pattern it is necessary to have an
area of at least 5 mm x 5 mm of white image
displayed, and if not adjustments may not be
possible. (In such case, [OUT OF ADJUST] will
appear and setting values remain unchanged.)

BRIGHT (brightness)
Total screen brightness can be adjusted while
watching the color pattern. (    buttons)

CONT (Contrast)
While watching the color pattern, adjustments can be
made so that all graduations appear. (    buttons)

Horizontal flicker noise

Vertical flicker noise

Screen frame

Color pattern