LL-T19D1 (serv.man9). Adjusting the screen display - Sharp Monitor User Guide / Operation Manual. Page 7

Adjustments can be made using On Screen
Display (OSD) Menu provided.

If you are using Windows, open the Adjustment
Pattern on the accompanying Utility Disk. (p.16)
If your system is not Windows, you can not use the
Adjustment Pattern. Therefore display an image
that makes the entire screen light and adjust it
through checking visually its actual tone.
This chapter provides the procedure how to adjust
the screen by using Adjustment Pattern (for
Windows).

1.Press the MENU button.

The WHITE BALANCE Menu will be displayed.

At this point relevant menu options can be
adjusted.
Each time the MENU button is pressed the next
menu is selected. (WHITE BALANCE 

→ MODE

SELECT 

→ OSD Menu disappears)

Note:
- The OSD Menu automatically disappears

approximately 30 seconds after the last
command.

Notes:
- On settings other than [STD] not all gradations

can be displayed. To display all gradations, set to
[STD].

- If [DISPLAY MODE] is set to [OFFICE], [sRGB] or

[VIVID], no other setting than [STD] can be
selected.

- Use the     buttons to select [COOL], [·], [STD],

[·], [WARM] or [USER].

- Selecting [USER] will display the setting values

for [R-CONTRAST], [G-CONTRAST] and [B-
CONTRAST], in order to make fine adjustments.

- Use the 

 / MODE button to select

[R-CONTRAST], [G-CONTRAST] and
[B-CONTRAST].

- To go to the next menu: MENU button

COOL ....... Color tone bluer than standard
   • ............. Color tone slightly bluer than standard
STD .......... Color tone standard setting
   • ............. Color tone slightly redder than standard
WARM ...... Color tone redder than standard

R-CONTRAST .....

  button for blue-green
  button for red

G-CONTRAST .....

  button for purple
  button for green

B-CONTRAST .....

  button for yellow
  button for blue

T19D1_gb.p65

2/14/2003, 3:07 PM

20