LL-T19D1 (serv.man10) - Sharp Monitor User Guide / Operation Manual

ll-t19d1 (serv.man10) user guide / operation manual
Model
LL-T19D1 (serv.man10)
Pages
3 Few pages! See other manuals at the bottom of the first or last page.
Size
466.71 KB
Type
PDF
Document
User Guide / Operation Manual
Brand
Device
Monitor
File
ll-t19d1-sm10.pdf
Date

Read Sharp LL-T19D1 (serv.man10) User Guide / Operation Manual online

23
English
Deutsc
h
Fran
ç
ais
Italiano
Espa
ñ
ol
English
Specifications
Product specifications
Model name
LL-T19D1-H (Frosty gray)/LL-T19D1-B (Black)
LCD display
48 cm measured diagonally TFT LCD module
Resolution (max.)
SXGA 1280 x 1024 pixels
Displayable colors (max.)
Approx.16.77 million colors (8 bit )
Brightness (max.)
300 cd/m
2
Dot pitch
0.294(H) x 0.294(V) mm
Contrast ratio
700:1
Angle of visibility
Left-right 170°; Up-down 170°
(contrast ratio 
>
=
 10)
Screen display size
Horizontal 376.3 mm x Vertical 301.1 mm
Video signal
Analog: Analog RGB (0.7 Vp-p) [75
Ω]
Digital: DVI standard based on 1.0
Sync signal
Separate Sync (TTL level: +/-), Sync on
Green, Composite Sync (TTL level: +/-)
Expansion compensation
Digital scaling (Enlarges VGA/SVGA/XGA etc. to
full screen size.)
Plug & Play
VESA DDC2B compatible
Power management
VESA: based on DPMS
DVI: based on DMPM
Input signal terminal
Analog:15 pin mini D-sub (3 rows) x 2
Digital: 24 pin DVI-D x 1
Screen tilt
Upward approx. 0 - 20°; downward approx. 0 - 5°
Screen swivel
Approx. 90° from left through right (Turn table type)
Power supply
AC100 - 240 V, 50/60 Hz
Temperature of operating environment
5 - 35°C
Power consumption
43 W maximum,
2.8 W when in power-saving mode
Dimensions
Approx. 423(W) x 222(D) x 392 - 439(H) mm
Weight
Approx. 6.9 kg (approx. 4.7 kg excluding stand)
(Excluding signal cable.)
Dimensions 
(Units: mm)
- Analog signal cable: approx. 1.8 m
- Digital signal cable, NL-C01E (purchased
separately): approx. 2.0 m
T19D1_gb.p65
2/14/2003, 3:07 PM
23
24
Specifications
Relevant signal timings (analog)
- Recommended resolution is 1280 x 1024.
- All are compliant only with non-interlaced.
- Frequencies for Power Macintosh and the Sun
Ultra series are reference values. To connect,
another adapter (commercially available) may be
required.
- If the monitor is receiving timing signals that are
not compatible, [OUT OF TIMING] will appear.
Follow your computer's instruction manual to set
the timing so that it is compatible with the
monitor.
- If the monitor is not receiving any signal (synch
signal), [NO SIGNAL] will appear.
Relevant signal timings (digital)
- Recommended resolution is 1280 x 1024.
- All are compliant only with non-interlaced.
- A computer with an output terminal conforming to
DVI (DVI-D24 pin or DVI-I29 pin) and with SXGA
output capability can be connected here.
(Depending on the type of computer to be
connected, the display may not work correctly.)
- If the monitor is receiving timing signals that are
not compatible, [OUT OF TIMING] will appear.
Follow your computer's instruction manual to set
the timing so that it is compatible with the
monitor.
- If the monitor is not receiving any signal (synch
signal), [NO SIGNAL] will appear.
Display mode
VESA
US text
Power
Macintosh
series
Sun Ultra
series
Hsync
Vsync
Dot
frequency
VESA
US text
Display mode
Hsync
Vsync
Dot
frequency
T19D1_gb.p65
2/14/2003, 3:07 PM
24
25
English
Deutsc
h
Fran
ç
ais
Italiano
Espa
ñ
ol
English
Specifications
The analog RGB input connector pin
(Mini D-sub connector with 15 pins)
Power management
The monitor is based on the VESA DPMS and the
DVI DMPM standards.
To activate the monitor's Power Management
function, both the video card and the computer
must conform to the VESA DPMS standard and the
DVI DMPM standard.
DPMS: Display Power Management Signaling
DMPM: Digital Monitor Power Management
DDC (Plug & Play)
No.
Function
1
Red video signal input
2
Green video signal input
3
Blue video signal input
4
GND
5
GND
6
For red video signal GND
7
For green video signal GND
8
For blue video signal GND
9
+5V
10
GND
11
N.C.
12
DDC data
13
For Hsync signal input
14
For Vsync signal input
15
DDC clock
The DVI-D input connector pin
(DVI-D connector with 24 pins)
No.
Function
No.
Function
1
TMDS data 2-
13 N.C.
2
TMDS data 2+
14 +5V
3
TMDS data 2/4 shield
15 GND
4
N.C.
16 Hot plug detection
5
N.C.
17 TMDS data 0-
6
DDC clock
18 TMDS data 0+
7
DDC data
19 TMDS data 0/5 shield
8
N.C.
20 N.C.
9
TMDS data 1-
21 N.C.
10 TMDS data 1+
22 TMDS clock shield
11 TMDS data 1/3 shield
23 TMDS clock +
12 N.C.
24 TMDS clock -
DMPM mode
Screen
Power
consumption
ON
Display on
43 W
OFF
Display off
2.8 W
DPMS mode
Screen
Power
H-sync V-sync
consumption
ON
Display on
43 W
Yes
Yes
STANDBY
No
Yes
SUSPEND
Display off
2.8 W
Yes
No
OFF
No
No
T19D1_gb.p65
2/14/2003, 3:07 PM
25
Page of 3
Display

Download Sharp LL-T19D1 (serv.man10) User Guide / Operation Manual

Here you can read online and download Sharp LL-T19D1 (serv.man10) User Guide / Operation Manual in PDF. LL-T19D1 (serv.man10) user guide / operation manual will guide through the process and help you recover, restore, fix, disassemble and repair Sharp LL-T19D1 (serv.man10) Monitor. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.