LL-T1820 (serv.man11) - Sharp Monitor User Guide / Operation Manual. Page 12

-

When connecting, ensure that both the monitor
and computer are switched off.

-

Be careful not to overly bend the cable or add
extension cords as this could lead to a
malfunction.

If necessary, excess cable can be housed in the
stand.

1. Remove the cover.

Gently pull the top of the cover towards yourself.

2. Run cable along the back of the stand.

Pass cable in front of the stand, and then bring it
through the back.

-

If the display is to be rotated, first house the
cables with the display in the long height position,
so there is sufficient length when the display is
turned.

3. Refit the cover.

Be careful not to pinch the cable.

-

If the cover is hard to refit, do not force it.
Check whether cables are trapped.

-

If the display is to be rotated, first house the
cable, and then check while gently turning the
display. If it cannot be turned, rehouse the cable
with sufficient slack. (If there is insufficient cable
length, rotation will be impossible. Forcing rotation
may cause cable disconnection.)