Read Sharp LL-T1811W Service Manual online
LLT-1811W
1 – 1
CHAPTER1. OUTLINE OF THE PRODUCT, NOMENCLATURE AND FUNCTION
1. SPECIFICATIONS
■
■
■
■
PRODUCT SPECIFICATIONS
• LCD display
18.1 inches (46 cm measured diagonally)
Super-V and Anti Glare Low Reflection TFT LCD module
• Resolution (max.)
SXGA 1280
u
1024 pixels
• Displayable colors (max.)
16.77 million colors (8 bit)
• Brightness (max.)
200cd/m
2
• Dot pitch
0.2805(H) 0.2805(V) mm
• Contrast ratio
350 : 1
• Angle of visibility
Left-right 150
o
; Up-down 150
o
• Screen display size
Horizontal 359 mm
u
Vertical 287.2 mm
• Video signal
Analog:
Analog RGB (0.7Vp-p) [75
Ω
]
Digital:
DVI standard based on 1.0
• Sync signal
Separate Sync (TTL level: +/-), Sync on Green,
Composite Sync (TTL level: +/-)
• Expansion compensation
Digital screening (enlargement of display to correct VGA/SVGA/XGA)
[1:1, expansion (fixed aspect ratio), expansion (total screen surface)]
[1:1, expansion (fixed aspect ratio), expansion (total screen surface)]
• Plug & Play
VESA:
DDC1/DDC2B compatible
• Power management
VESA:
based on DPMS
DVI:
based on DMPM
• Input signal terminal
Analog:
15 pin mini D-sub (3 rows)
Digital / Analog:
29 pin DVI-I
• USB hub function
1 upstream port, 2 downstream ports
(bus-powered hub based on USB standard Rev 1.1)
• Screen tilt
Upward 0
o
- 30
o
; downward 0
o
- 5
o
• Screen swivel
90
o
from left through right
• Power supply
AC100-240V, 50/60Hz (Use special AC adapter, type NL-A03E of
Sharp Corporation.)
• Temperature of operating environment
5 - 35
o
C
• Power consumption
Maximum 44W (3.2W when in power-saving mode)
(Use special AC adapter.)
• Dimensions (W
u
D
u
H)
443 mm
u
218 mm
u
465 mm
• Weight (excluding AC adapter)
Approx. 10.1 kg, Display area only, approx. 7.8kg
■
■
■
■
DIMENSIONS (Units: mm)
Special AC adapter
Option
Digital signal cable (NL-C01E):
Approx. 2.0 m
Analogue signal cable (NL-C02E): Approx. 2.0 m
Length of analog signal cable: approx. 2.0 m*
Length of USB cable included: approx. 1.8 m
Length of USB cable included: approx. 1.8 m
*Length from analog signal input terminal
Approx. 2.0 m
Approx. H 120 mm
u
D 60 mm
u
H 35 mm
Click on the first or last page to see other LL-T1811W service manuals if exist.