LL-T1810A (serv.man19) - Sharp Monitor User Guide / Operation Manual. Page 7

Notes:

•

Depending on the computer or OS, it may be necessary to
use the computer to install monitor set-up information. If so,
follow the steps below to install the monitor set-up informa-
tion.

•

When setting up the monitor or a connected computer for
the first time, connecting an additional computer or after
having changed an aspect of the current system, perform
an automatic screen adjustment before use.

When connected to two computers, use the INPUT button to switch
between input signal terminals (i.e. to choose which computer’s
screen you want displayed.)

CAUTION!

Do not leave the monitor in contact with rubber or plastic items for
long periods of time as this could lead to color change or change in
shape.

An arm or stand based on the VESA standard (purchased separately)
can be attached to the monitor.

Procurement of the arm or stand is at the customer’s discretion.

Attachments must satisfy the following.

Compatible with the VESA standard

Have a gap of at least 100 mm x 100 mm between the screw holes
on the section to be attached

Not be likely to fall off or break off after being attached to the
monitor.

Note: While following these instructions, please also refer to the in-

stallation instructions in the operation manual included with the
arm or stand

1. Spread out a soft cloth on a suitable horizontal surface.

2. Being careful not to damage the monitor, gently lay the monitor on

it display-side down.

3. Remove the stand cover and the covers to the left and to the right.

4. Remove the two screws, and remove the cover.

5. Remove the four screws and then remove the stand from the

monitor.

Power LED
Green light:      In use
Orange light:    Power saving mode or signal
  

        failure

Lamp off:         Power OFF

INPUT button
Pushing this button switches between input 
signal terminals, so that the screen changes to 
display any of the machines connected.

OFF

Turn off device to 
which monitor is 
connected

Turn monitor off 

Press power button

(Rear view)

Cover

Cover

Stand cover

Lift one side

Cover

Two screws

Four screws

Stand