LL-T1803 (serv.man19) - Sharp Monitor User Guide / Operation Manual. Page 12

-

After unplugging the AC adaptor or power cord, be
sure to wait at least 10 seconds before plugging
in again. If you put the plug back in immediately
after unplugging, damage may be caused and the
screen malfunction or not display.

1. Press the monitor's POWER button.
2. Turn on the computer.

The power LED will be lit green, and the screen
will display an image.

ON

If using the monitor for the first time or after
having changed the system settings during use,
perform an automatic screen adjustment (p. 15).

When connecting to a notebook, if the notebook
computer's screen is set so that it is displaying at
the same time, the MS-DOS screen may not be
able to display properly. In this case, change the
settings so that only the monitor is displaying.

Use the INPUT button to switch between signal input
terminals.

Analog RGB signal

Digital RGB signal

INPUT

INPUT

INPUT-2(DIGITAL)

INPUT-1(ANALOG)

Turn on the
computer

Press power button

1. Turn the computer off.
2. Press the monitor's POWER button.

The Power LED will disappear.

OFF

If the monitor is not going to be used for a long
period of time, be sure to unplug it from the AC
outlet.

Press power button

Turn the
computer off