Read Sharp LL-T17D4H (serv.man10) Service Manual online
LL-T17D4-H/B
CONNECTION, ADJUSTMENT, OPERATION, AND FUNCTIONS
2 – 2
1-2. Connection of headphones
(commercially available)
Headphones (commercially available) can be connected.
Note: When the headphones are connected, no sound can be heard
from the monitor speakers.
1-3. Connecting the monitor to a power source.
1-4. Turning the power on
1.
Turn on the main power of the monitor.
• When switching the main power switch on and off, always wait for
an interval of at least 5 seconds. Rapid switching may result in
malfunction.
2. Press the monitor's power button.
The power LED will light up orange.
3. Turn on the computer.
• When a signal is input from the computer, the power LED lights
up green, and the screen is displayed. (After power is turned on, it
may take a little time until the screen is displayed.)
Note:
• If the input terminal to which the computer is connected has not
been selected, the screen will not be displayed. If necessary, per-
form input terminal switching. (right column)
• When using an analog signal, perform an automatic screen
adjustment under the following conditions:
-Using the monitor for the first time.
-After having changed the system settings during use.
• Depending on the type of computer or OS, you may need to
install the monitor set-up information on your system.
• When connecting to a notebook, if the notebook computer's
screen is set to display at the same time, the MS-DOS screen
may not be able to display properly. In this case, change the set-
tings so that only on the monitor.
1-5. Changing between input terminals
Use the INPUT button to switch between signal input terminals.
Note:
• When there is no input signal, [NO SIGNAL] is displayed.
1-6. Turning the power off
1. Turn the computer off.
2. Press the monitor's POWER button.
The Power LED will disappear.
If the monitor will not be used for a long time, turn off the main power
switch of the monitor, and remove the power plug from the outlet.
Headphones
Headphone ter minal
AC outlet
Power cord
Power terminal
Main power switch
Press power button.
ON
Turn on the
computer power
supply.
computer power
supply.
Analog RGB input
DVI-I input
terminal
terminal
INPUT-1
<ANALOG>
INPUT-2
< >
INPUT
Press power button.
Turn the
computer off.
OFF
Click on the first or last page to see other LL-T17D4H (serv.man10) service manuals if exist.