Read Sharp LL-T1620 (serv.man9) Service Manual online
PC-UM10M
LL-T1520-H/B LL-T1620-H/B CONNECTION, ADJUSTMENT, OPERATION, AND FUNCTIONS
2 – 3
CHANGING BETWEEN INPUT TERMINALS
Use the INPUT button to switch between signal input terminals.
TURNING THE POWER OFF
1. Turn the computer off.
2. Press the monitor’s POWER button.
The Power LED will disappear.
If the monitor will not be used for a long time, turn off the main power
switch of the monitor, and remove the power plug from the outlet.
2. INSTRUCTIONS FOR ATTACHING A VESA COMPLIANT ARM
An arm or stand based on the VESA standard (commercially available)
can be attached to the monitor.
Procurement of the arm or stand is at the customer’s discretion.
Arms or stands able to be used
Attachments must satisfy the following.
• Compatible with the VESA standard
• Have a gap of 75 mm x 75 mm between the screw holes on the sec-
tion to be attached
• Not be likely to fall off or break off after being attached to the monitor.
How to attach the arm or stand
• Be careful not to overly bend the cable or add extension cords as this
could lead to malfunction.
• While following these instructions, please also refer to the installation
instructions in the operation manual included with the arm or stand.
1.
Turn off the monitor’s power and unplug AC plug from AC outlet.
2.
Remove the cable.
3.
Spread out a soft cloth on a suitable horizontal surface.
4.
Being careful not to damage the monitor, gently lay the monitor on it
display-side down.
5
Remove the four screws and then remove the stand from the moni-
tor.
Notes: • The stand is specially made for use with this monitor. Once
having removed the stand, never attempt to attach it to
another device.
another device.
• Once having removed the screws, store them together with
the stand and if the stand is ever re-attached be sure to use
the original screws. Using different screws could lead to a
malfunction.
malfunction.
6. Attach the arm to the monitor with the four screws.
Note: The screws used to attach the arm should be M4 screws with a
length of 6 mm ~ 8 mm protruding from the surface to be
attached. Using different screws could lead to malfunction or may
lead to the monitor falling off, internal damaged, personal injury.
lead to the monitor falling off, internal damaged, personal injury.
INPUT-1
<ANALOG>
INPUT
INPUT-2
<ANALOG>
INPUT-2
<DIGITAL>
Analog RGB input terminal
DVI-I input terminal
(digital)
DVI-I input terminal
(analog)
Press power button
Turn on the
computer off
computer off
6 ~ 8 mm
Screw used to attach arm
Arm
Part of monitor to which
arm is attached
arm is attached
Click on the first or last page to see other LL-T1620 (serv.man9) service manuals if exist.