Read Sharp LL-T1620 (serv.man9) Service Manual online
PC-UM10M
LL-T1520-H/B LL-T1620-H/B CONNECTION, ADJUSTMENT, OPERATION, AND FUNCTIONS
2 – 1
CHAPTER 2. CONNECTION, ADJUSTMENT, OPERATION, AND FUNCTIONS
1. CONNECTING THE MONITOR AND TURNING THE MONITOR ON AND OFF
Caution: • When connecting, ensure that both the monitor and com-
puter are switched off.
• Be careful not to overly bend the cable or add extension
cords as this could lead to malfunction.
Cable storage
If necessary, excess cable can be housed in the stand.
1.
Remove the cover.
Gently pull the top of the cover towards yourself.
2.
Run cable along the back of the stand.
3.
Refit the cover.
Be careful not to pinch the cable.
• If the cover is hard to refit, do not force it.
Check whether cables are trapped.
CONNECTING THE MONITOR TO A COMPUTER
Connecting using accessory analog signal cable
Connect the accessory analog signal cable to the analog RGB input ter-
minal of the display, and the analog RGB output terminal of the com-
puter.
puter.
• Paying attention to connector direction, firmly insert the signal
cable to terminal, and then tighten the screws at both sides.
If connecting to a D-sub 15 pin 2 row Apple Power Macintosh, attach a
Macintosh conversion adapter (commercially available) to the analog
signal cable.
signal cable.
Connecting using a separately sold display cable
The separately sold display cable enables connection between the DVI-
I input terminal on the display and the digital or analog RGB output ter-
minal of the computer.
When connecting to a digital RGB output terminal:
• Use a digital signal cable (model name: NL-C01E)
• The monitor can be connected to the following computers that have a
DVI standard output terminal (DVI-D24 pin or DVI-I29 pin) for digital
connection. (Note that the display may not appear correctly, depend-
ing on the connected computer.)
-- LL-T1520: Computers capable of XGA output
-- LL-T1520: Computers capable of XGA output
-- LL-T1620: Computers capable of SXGA output
When connecting to an analog RGB output terminal:
• Use an analog signal cable (model name: NL-C02E).
Analog signal cable
Analog RGB input
terminal
terminal
Analog RGB output terminal
Macintosh conversion adapter
DVI-I input terminal
RGB output terminal
Display cable
(to be purchased separately)
(to be purchased separately)
Click on the first or last page to see other LL-T1620 (serv.man9) service manuals if exist.