LL-T15G4 (serv.man2) - Sharp Monitor User Guide / Operation Manual. Page 9

6

5

4

2

1

10

9

8

14

3

7

12

11

13

1. INPUT button ........................... To switch between the signal's input terminals.
2. MENU button ........................... This button is used to pop-up, select and close the OSD (On Screen

Display) Menu.

3.

 / MODE button ..................... When the OSD Menu is displayed:

This button is used to select menu options.

When the OSD Menu is not displayed:

This button is used to set DISPLAY MODE.

4.

   buttons ............................. When the OSD Menu is displayed:

These buttons are used to select an option or adjust the value of the
selected option.

When the OSD Menu is not displayed:

These buttons are used to adjust backlight brightness and speaker
volume.

5. Power LED ............................... This LED is lit green when in use and orange when in power-saving

mode.

6. Power button ............................ Pressing this button turns the power on. (After turning the power on, it

may take a little time before an image appears on the screen.)
Press the button again to turn the power off.

7. Speakers .................................. Audio entering via the external device connected to the monitor can

be heard.

8. Power terminal
9. DVI-D input terminal ................ The computer's digital RGB output terminal can be connected here.

The separately-sold cable (NL-C04J) is necessary for connection.
(p.8)
It can be connected to a computer with a DVI-compatible output
terminal (DVI-D24 pin or DVI-I29 pin) and which has XGA output
ability. Depending on the computer to be connected, correct display
may or may not be possible.

10. Analog RGB input terminal ..... The analog signal cable is connected here. The analog signal cable

included should be used.

11. Audio input terminal ................ A computer

'

s audio output terminal can be connected here. The audio

cable included should be used.

12. Headphone terminal ............... Headphones (commercially available) can be connected here.
13. Security lock anchor ................ By connecting a security lock (commercially available) to the security

lock anchor, the monitor is fixed so that it cannot be transported.
The security slot works in conjunction with Kensington Micro Saver
Security Systems.

14. Ventilation openings ............... Note: Never block the ventilation openings as this may lead to

overheating inside the monitor and result in malfunction.

Untitled-40

2003/09/10, 15:41

9