Read Sharp LL-T15A4 Service Manual online
LL-T15A4
CONNECTION, ADJUSTMENT, OPERATION, AND FUNCTIONS
2 – 2
1-5. TURNING THE POWER OFF
1.
Turn the computer off.
2.
Press the monitor's POWER button.
The Power LED will disappear.
If the monitor is not going to be used for a long period of time, be sure to
unplug it from the AC outlet.
1-6. INSTRUCTIONS FOR ATTACHING A VESA
COMPLIANT ARM
An arm or stand based on the VESA standard (commercially available)
can be attached to the monitor.
Procurement of the arm or stand is at the customer's discretion.
Procurement of the arm or stand is at the customer's discretion.
When choosing the arm to be installed please take note of the following
points.
• The arm should be compatible with the VESA standard, and there
must be a gap of 75mm x 75mm between the screw holes on the
section to be attached.
section to be attached.
• The arm must not fall off or break off after being attached to the
monitor.
1.
Ensure that both the monitor and computer are switched off.
2.
Unplug the power cord from the AC outlet.
3.
Remove the analog signal cable and the audio cable from the com-
puter.
puter.
4.
Press down on the stand and gently fold back the monitor.
• Be careful not to allow your fingers to be pinched.
• Do not overly bend the cable or add extension cords as this could
lead to malfunction.
5. Being careful not to damage the monitor, spread out a soft cloth and
lay the monitor on it display-side down.
6. Attach the arm to the monitor with four screws.
Note: The screws used to attach the arm should be M4 screws with a
length of 8 mm ~ 10 mm protruding from the surface to be
attached. Using different screws could cause the monitor to fall off
or to be internally damaged.
7. Connect the analog signal cable, the audio cable and power cord.
The stand may be removed.
1. Turn off the monitor, and remove the analog signal cable, the audio
cable and the power cord from the monitor.
2. Being careful not to damage the monitor, spread out a soft cloth and
lay the monitor on it display-side down.
3. Remove the four screws and then remove the stand from the moni-
tor.
Caution: Be careful not to get your fingers piched between the display
and stand nor to let the stand drop. There could lead to injury.
Note:
• The stand is specially made for use with this monitor. Once hav-
ing removed the stand, never attempt to attach it to another
device.
• Once having removed the screws, store them together with the
stand and if the stand is ever re-attached be sure to use the origi-
nal screws.
Using different screws could lead to a malfunction.
4. Follow instruction no.6 to attach the arm to the monitor, then con-
nect the analog signal cable, the audio cable and the power cord.
OFF
Press power button
Turn the
computer off
computer off
8~10mm
Screw used to attach arm
Arm
Part of monitor to which arm is
attached
Part of monitor to which arm is
attached
Click on the first or last page to see other LL-T15A4 service manuals if exist.