LL-T15A3 (serv.man9). Complete - Sharp Monitor Service Manual (repair manual). Page 5

Read Sharp LL-T15A3 (serv.man9) Service Manual online

LL-T15A3
CONNECTION, ADJUSTMENT, OPERATION, AND FUNCTIONS
2 – 1
CHAPTER 2. CONNECTION, ADJUSTMENT, OPERATION, AND FUNCTIONS
1. CONNECTING THE MONITOR AND TURNING THE MONITOR ON AND OFF
Caution:
•  When connecting, ensure that both the monitor and computer are
switched off.
•  Be careful not to overly bend the cable or add extension cords as
this could lead to a malfunction.
1-1. CONNECTING THE MONITOR TO A COMPUTER
• Paying attention to connector direction, firmly insert the signal cable
to terminal, and then tighten the screws at both sides.
If connecting to a D-sub 15 pin 2 row Apple Power Macintosh, attach a
Macintosh conversion adapter (commercially available) to the analog
signal cable.
1-2. CONNECTING THE MONITOR TO A POWER 
SOURCE
1.
Connect the AC adapter to the monitor's power terminal.
2. Attach the power cord to the AC adapter and place the power plug
into the AC outlet.
1-3. TURNING THE POWER ON
1. Press the monitor's POWER button.
2. Turn on the computer.
The power LED will be lit green, and the screen will display an
image.
Note:
•  If using the monitor for the first time or after having changed the
system settings during use, perform an automatic screen adjust-
ment.
•  Depending on the computer or OS, it may be necessary to use the
computer to install monitor set-up information. If so, follow the
steps below to install the monitor set-up information.
1-4. TURNING THE POWER OFF
1. Turn the computer off.
2. Press the monitor's POWER button.
The Power LED will disappear.
If the monitor is not going to be used for a long period of time, be
sure to unplug it from the AC outlet.
Analog signal cable
Analog RGB output terminal
(Mini D-sub 15 pin, 3 row)
Macintosh conversion adapter
Power terminal
AC adapter
Power cord
AC outlet
Power LED
Power button
Page of 18
Display

Click on the first or last page to see other LL-T15A3 (serv.man9) service manuals if exist.