LL-T15A3 (serv.man13). Adjusting the screen display - Sharp Monitor User Guide / Operation Manual. Page 2

Options in the ADJUSTMENT Menu can be
adjusted automatically (CLOCK, PHASE, H-POS,
V-POS).

Note:
- When setting up this monitor for the first time or

after having changed an aspect of the current
system, perform an automatic screen adjustment
before use.

To perform an automatic adjustment, first display
an image that makes the entire screen very bright.
If you are using Windows, you can also use the
Adjustment Pattern on the accompanying Utility
Disk for Windows.

Displaying the Adjustment Pattern (for Windows)
This explanation is for Windows 95/98/2000/Me/XP,
and assumes that the floppy disk drive is [A drive].
Note:
- If the floppy disk drive of your computer is not

"A drive", please read the below substituting the
floppy disk drive you are using in place of
"A drive" or "A".

1. Place the Utility Disk (provided) into the

computer's A drive.

2. Open [My Computer] and select [3 ½ Floppy

(A:)]. If using Windows 3.1, open [File Manager]
and choose "A drive".

3. Double click on [Adj_uty.exe] to run the

Adjustment Program. The Adjustment Pattern will
appear.

Adjustment pattern

After completing the adjustment, press the
computer's [Esc] key to exit the Adjustment
Program.

Note:
- If your computer's display mode is set to 65K

colors, you may see the different color levels in
each color pattern or the gray scale may look
colored. (This is due to the input signal
specification and is not a malfunction.)

Automatic adjustment can be performed using
either the AUTO button or the MENU button.

Automatic adjustment using the AUTO button
1.With the OSD Menu not displayed, press the

AUTO button.

2.Press the AUTO button again.

[ADJUSTING] will appear on the screen, and
after a few seconds [ADJUSTING]  will disap-
pear. (The automatic adjustment is now com-
plete.)

Automatic adjustment using the MENU button
1. Press the MENU button.

The ADJUSTMENT Menu will be displayed.

2. Press the   button.

The screen will become dark and [ADJUSTING]
will be displayed. After a few seconds the
ADJUSTMENT Menu will return. (The automatic
adjustment is now complete.)

3. Press the MENU button 4 times to make the

OSD Menu disappear.

Notes:
- In most cases automatic adjustment is sufficient.
- If necessary due to any of the following, manual

adjustments (p. 13) can be performed after the
automatic adjustment.
- When further fine adjustment is needed.
- When [OUT OF ADJUST] is displayed. (When

the screen displays an entirely dark image, the
automatic screen adjustment may be disabled.
When making an automatic adjustment, be
sure to either use the Adjustment Pattern or try
displaying an image that makes the entire
screen very bright.)