Read Sharp LL-T15A1 Specification online
CHAPTER 1. OUTLINE OF THE PRODUCT, NOMENCLATURE AND FUNCTION
1. SPECIFICATIONS
LCD display
38 cm (15 inch) TFT Color LCD module
Dot pitch
0.297 (H) x 0.297 (V) mm
Screen display size
Horizontal 304.1 mm x Vertical 228.1 mm
Resolution (max.)
XGA 1024 x 768
Displayable colors (max.)
16.19 million colors
Video signal
Analog RGB (0.7p-p) [75
W
]
Sync signal
H-Sync (TTL level: +/-), V-Sync (TTL level: +/-)
Computer signal input terminal
15 pin mini D-sub connector
Plug & Play
VESA:DDC1/DDC2B
Power management
VESA DPMS based
Temperature of operating environment
5 – 35°C
Power supply
AC100-240V (Use special AC adapter)
Power consumption
36W max. (5W when in power-saving mode)
Dimensions (W x D x H, excluding rubber base)
368 mm x 170 mm x 353 mm
Weight
Approx. 4.1 kg
■
DIMENSIONS (Units : mm)
■
Signal timings
Display mode
Hsync (kHz)
Vsync (Hz)
(MHz)
VESA
640 x 480
31.5kHz
60Hz
25.175MHz
37.9kHz
72Hz
31.5MHz
37.5kHz
75Hz
31.5MHz
800 x 600
35.1kHz
56Hz
36.0Mhz
37.9kHz
60Hz
40.0MHz
48.1kHz
72Hz
50.0MHz
46.9kHz
75Hz
49.5MHz
1024 x 768
48.4kHz
60Hz
65.0MHz
56.5kHz
70Hz
75.0MHz
60.0kHz
75Hz
78.75Mhz
US text
720 x 400
31.5kHz
70Hz
28.3MHz
Power
Macintosh
series
Macintosh
series
640 x 480
35.0kHz
66.7Hz
30.5MHz
832 x 624
49.7kHz
74.6Hz
57.3MHz
1024 x 768
60.2kHz
75Hz
80.0MHz
Notes:
·
All are compliant only with non-interlaced.
·
Frequencies for Power Macintosh and the Sun Ultra series
are reference values.
are reference values.
·
If the monitor is receiving timing signals that are not com-
patible, [OUT OF TIMING] will appear. Follow your com-
puter’s instruction manual to set the timing to be compatible
with the monitor.
patible, [OUT OF TIMING] will appear. Follow your com-
puter’s instruction manual to set the timing to be compatible
with the monitor.
·
If the monitor is not receiving any signal (synch signal), [NO
SIGNAL] will appear.
SIGNAL] will appear.
130
368
45
313
353
200
170
RGB signal cable length:
approx. 1.8 m
approx. 1.8 m
AC adapter
Approx.
1.8 m
Approx. H 120 mm x D 60 mm x H 37 mm
Weight : Approx.350g
>>>>> USE FONT <<<<<
Helvetica/ Helvetica-Condensed/ Century-Schoolbook/ Symbol & OriginalFonts: (RingWorld2/RingFont2/Pa
Symbol/PartsCod)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
■
The connector pin
Number
Function
1
Red video signal input
2
Green video signal input
3
Blue video signal input
4
N.C.
5
N.C.
6
For red video signal GND
7
For green video signal GND
8
For blue video signal GND
9
DDC + 5V
10
N.C.
11
GND
12
DDC data
13
For H-sync signal input
14
For V-sync signal input
15
DDC clock
■
Power management
The monitor is based on VESA DPMS (Display Power Management
Signaling).
Signaling).
To activate the monitor’s Power Management function, both the video
card and the computer must conform to the VESA DPMS standard.
card and the computer must conform to the VESA DPMS standard.
DPMS
mode
Screen
H-sync
V-sync
ON
Display on
36W
Yes
Yes
STANDBY
Display off
5W
No
Yes
SUSPEND
Yes
No
OFF
No
No
■
DDC (Plug & Play)
This monitor supports the VESA DDC (Display Data Channel) stand-
ard.
ard.
DDC is a signal standard for carrying out Plug & Play functions on the
monitor or PC. It transfers information such as degree of resolution
between the monitor and PC. You can use this function if your PC is
DDC compliant and if it is set so that it can detect the Plug & Play
monitor.
monitor or PC. It transfers information such as degree of resolution
between the monitor and PC. You can use this function if your PC is
DDC compliant and if it is set so that it can detect the Plug & Play
monitor.
2. PRODUCT DESCRIPTION
1.
MENU button
This button is used to pop-up, select and close the OSD Menu.
2.
SELECT button
Selects the menu option to be adjusted.
3.
buttons
When the On Screen Display (OSD) Menu is displayed:
These buttons are used to increase or decrease the value of a
selected option.
When the OSD Menu is not displayed:
These buttons are used to adjust backlight brightness.
These buttons are used to increase or decrease the value of a
selected option.
When the OSD Menu is not displayed:
These buttons are used to adjust backlight brightness.
4.
BRIGHT button
The brightness sensor measures the brightness of the surround-
ing environment and automatically adjusts to the right bright-
ness.
ing environment and automatically adjusts to the right bright-
ness.
5.
Power LED
This LED is lit green when in use and orange when in power-
saving mode.
saving mode.
6.
Power button
Pressing this button turns the power on. (After turning the power
on, it may take a little time before the screen displays.)
Press the button again to turn the power off.
on, it may take a little time before the screen displays.)
Press the button again to turn the power off.
7.
Brightness sensor
Measures the brightness of the surrounding environment.
8.
Power terminal
Connect the AC adapter (included) here.
9.
RGB signal cable
Connects to the computer’s analog RGB output terminal.
10. Ventilation openings
Note: Never block the ventilation openings as this may lead to
overheating inside the monitor and result in malfunction.
overheating inside the monitor and result in malfunction.
5
4
3
2
1
15
14
13
12
11
10
9
8
7
6
Mini D-sub connector with 15 pins
1
2
3
4
5
7
8
9
10
6
Front view
Rear view
Display
