Read Sharp LL-T15A1 (serv.man8) Service Manual online
CHAPTER 3. DISASSEMBLY AND ASSEMBLY
[1] SEPARATING THE LCD FROM THE
STAND
1.
Pull the cover
in the direction of the arrow to remove.
2.
Remove the four screws
to separate the LCD from the stand.
[2] THE LCD SECTION
1.
Remove the three screws
, raise the rear panel
in the
direction of the arrow, and remove the connector
.
2.
Remove the four screws
, raise the LCD module
in the
direction of the arrow, and remove the connectors
,
and
.
Now, you can separate the LCD module
from the rear panel
.
1
1
1
2
3
1
2
3
4
6
5
3.
Remove the five screws
and the connector
. Then, remove
the I/F board cover.
4.
Remove the screw
and open the three FPC stoppers for the
three FPC connectors
in the direction of the arrows to remove
the I/F board
.
5.
Remove the two screws
and three connectors
. Then, re-
move the inverter board cover
.
Remove the inverter board
.
1
2
1
1
2
3
1
2
4
3
Display
